1
| Local Path Planning for Mobile Robots Based on Fuzzy Dynamic Window Algorithm | 孙瑛 | Sensors | SCI |
2
| Reform of the Training Program of Intelligent Manufacturing Engineering of Universities in the Steel Industry | 段现银 | Sustainability | SCI |
3
| Numerical modelling of hook and claw-type vacuum pump performance based on cut cell Cartesian method | 严迪 | Vacuum | SCI |
4
| Dynamic response-oriented multiscale topology optimization for geometrically asymmetric sandwich structures with graded cellular cores | 张严 | Computer Methods in Applied Mechanics and Engineering | SCI |
5
| Microstructure and tribological performance of ultra-high speed laser-cladded AlCrCoFeNi2.1-xTiB2 (x = 0， 0.5， 1.0， 1.5 and 2.0 wt%) high-entropy alloy coatings | 蔡召兵 | Materials Today Communications | SCI |
6
| Gesture recognition algorithm based on multi-scale feature fusion in RGB-D images | 孙瑛 | IET Image Processing | SCI |
7
| Comparative Study on Microstructure and Tribological Property of VCN， VCN-Al， and VCN/Al Films | 蔡召兵 | Journal of Materials Engineering and Performance | SCI |
8
| Indoor object segmentation based on YOLACT++ | 孙瑛 | International Journal of Wireless and Mobile Computing | SCI |
9
| Research on Swing Model and Fuzzy Anti Swing Control Technology of Bridge Crane | 余震 | Machines | SCI |
10
| Maximum ladle shell temperature prediction based on GABP neural network | 孙瑛 | International Journal of Wireless and Mobile Computing | SCI |
11
| Effect of warm-rolling temperature on the microstructural evolution and mechanical properties of large 2219 Al-Cu alloy rings | 郭万富 | Materials Today Communications | SCI |
12
| Level set-based topological design of multiphase micro-architectured materials using alternating active-phase method | 张严 | Materials and Design | SCI |
13
| A Comparative Investigation on Performance of Fiber Bragg Grating Soil Pressure Sensors With Different Configurations | 郭永兴 | IEEE Sensors Journal | SCI |
14
| Investigation of gesture recognition based on optical fiber Bragg grating sensors | 熊丽 | Measurement | SCI |
15
| Meter-scale Thin-walled Structure with Lattice Infill for Fuel Tank Supporting Component of Satellite: Multiscale Design and Experimental Verification | 张严 | Computer Modeling in Engineering & Sciences | SCI |
16
| Damage Distribution Map Based Damage Accumulation Calculation Approach for Welded Joints | 党章 | Metals | SCI |
17
| Design and investigation of a fiber Bragg grating tilt sensor with vibration damping | 郭永兴 | IEEE Sensors Journal | SCI |
18
| An end-to-end steel surface defect detection approach via Swin transformer | 汤勃 | IET Image Processing | SCI |
19
| Effects of correction of thermal properties on 3D conjugate heat transfer of aerostatic thrust bearings | 郭良斌 | Journal of Mechanical Science and Technology | SCI |
20
| Study on thermal deformation of high-pressure aerostatic thrust bearing in uneven temperature field | 郭良斌 | Journal of Mechanical Science and Technology | SCI |
21
| Effects of cold deformation modes on microstructure uniformity and mechanical properties of large 2219 Al–Cu alloy rings | 郭万富 | Reviews on Advanced Materials Science | SCI |
22
| Effect of Ultrasonic Surface Rolling on the Fretting Wear Property of 7075 Aluminum Alloy | 张坡 | Metals | SCI |
23
| High-order Synchrosqueezing Superlets Transform and its application to mechanical fault diagnosis | 易灿灿 | APPLIED ACOUSTICS | SCI |
24
| NGLSFusion: Non-Use GPU Lightweight Indoor Semantic SLAM | 蒋林 | Applied Sciences-Basel | SCI |
25
| Steel Strip Defect Sample Generation Method Based on Fusible Feature GAN Model under Few Samples | 易灿灿 | Sensors (Switzerland) | SCI |
26
| Facile Preparation of Hierarchical Micro-/Nanostructure Superhydrophobic Surface with Excellent Corrosion Resistance on Ti6Al4V-Based Composite for Nuclear Fuel Reprocessing | 汤名锴 | Advanced Engineering Materials | SCI |
27
| Large depth-of-field image fusion method for complex gyration class mechanical parts | 张泽琳 | Journal of Electronic Imaging | SCI |
28
| Integrated modeling for retired mechanical product genes in remanufacturing: A knowledge graph-based approach | 王蕾 | Advanced Engineering Informatics | SCI |
29
| Models and algorithms for U-shaped assembly line balancing problem with collaborative robots | 李梓响 | Soft Computing | SCI |
30
| Physics-informed Gaussian process for tool wear prediction | 林昕 | ISA Transactions | SCI |
31
| Physics-informed deep learning for tool wear monitoring | 林昕 | IEEE Transactions on Industrial Informatics | SCI |
32
| A Voronoi path planning extracted from improved skeleton for dynamic environments | 蒋林 | Journal of Mechanical Science and Technology | SCI |
33
| A Multi-Information Fusion ViT Model and Its Application to the Fault Diagnosis of Bearing with Small Data Samples | 徐增丙 | Machines | SCI |
34
| Dry fretting and sliding wear behavior of 7075-T651 aluminum alloy under linear reciprocating motion: A comparative study | 张坡 | Wear | SCI |
35
| Equipment Electrocardiogram (EECG): Making Intelligent Production Line More Robust | 陈宝通 | Journal of Intelligent Manufacturing | SCI |
36
| Association Rule Mining-Based Generalized Growth Mode Selection: Maximizing the Value of Retired Mechanical Parts | 王蕾 | Sustainability | SCI |
37
| A molecular dynamics simulation-based laser melting behavior analysis for Ti–Al binary alloy | 王蕾 | International Journal of Modern Physics B | SCI |
38
| Automobile recycling for remanufacturing in China: A systematic review on recycling legislations， models and methods | 王蕾 | Sustainable Production and Consumption | SCI |
39
| Simultaneously enhanced strength and ductility of AlSi7Mg alloy fabricated by laser powder bed fusion with on-line static magnetic field | 李伟 | Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing | SCI |
40
| Thermodynamic properties of oil droplets in oil-injected screw compressors and their influencing factors | 严迪 | Proceedings of the Institution of Mechanical Engineers， Part E: Journal of Process Mechanical Engineering | SCI |
41
| Collaborative control for in situ monitoring of molten pool in selective laser melting | 林昕 | Frontiers in Mechanical Engineering | SCI |
42
| 基于语义物体尺寸链的改进自适应蒙特卡洛动态定位研究 | 蒋林 | 机械工程学报 | EI |
43
| REMAINING USEFUL LIFE PREDICTION BASED ON A JOINT MODEL WITH DEGRADATION-FAILURE ASSOCIATION STRUCTURES | 钱新博 | UPB Scientific Bulletin， Series D: Mechanical Engineering | EI |
44
| 可折展扑翼飞行器瞬态折展机构设计与运动特性分析 | 侯宇 | 机械科学与技术 | EI |
45
| 固溶处理对激光粉末床熔融AZ91D镁合金的微观组织和力学性能影响 | 李伟 | 中国有色金属学报 | EI |
46
| 激光选区熔化Cu-15Ni-8Sn合金的显微组织、拉伸和摩擦磨损性能 | 李伟 | 中国有色金属学报 | EI |
47
| 面向功率和制孔质量的CFRP钻削工艺参数多目标优化方法 | 马峰 | 机械工程学报 | EI |
48
| 基于光纤布拉格光栅的扑翼机器人三维扑动变形测量 | 郭永兴 | 光学精密工程 | EI |
49
| 基于二阶近似扩展卡尔曼滤波的锂离子电池SOC估计 | 张旭刚 | 中国机械工程 | EI |
50
| 激光熔覆MoNbTaVW 难熔高熵合金涂层微动磨损性能研究 | 蔡召兵 | 材料导报 | EI |
51
| 基于BP神经网络的轧机刚度预测模型 | 但斌斌 | 轧钢 | EI |
52
| 基于参考轨迹实时修正的机器人轨迹跟踪控制方法 | 李公法 | 农业机械学报 | EI |
53
| 高承载梯度分层点阵结构的拓扑优化设计方法 | 丁喆 | 力学学报 | EI |
54
| 薄带硅钢心形屈曲机理及预防方法研究 | 王兴东 | 机械工程学报 | EI |
55
| 考虑低碳的再制造工艺方案选择方法 | 张泽琳 | 计算机集成制造系统 | EI |
56
| 面向废旧机械产品广义生长的再制造服务组合与优化方法 | 王蕾 | 机械工程学报 | EI |
57
| 变胞手爪攀爬机器人多姿态力学分析 | 侯宇 | 机械设计与制造 | 中文核心 |
58
| 永磁轮式管外攀爬机器人结构设计与力学分析 | 侯宇 | 机械传动 | 中文核心 |
59
| 基于单目视觉和轮式编码器的室内移动机器人松耦合定位方法 | 侯宇 | 武汉科技大学学报 | 中文核心 |
60
| TensorFlow监测液压缸内部微小泄漏量的研究方法 | 郭媛 | 机械设计与制造 | 中文核心 |
61
| 含有针阀的气泡雾化喷嘴结构与工艺参数仿真 | 邹光明 | 传感器与微系统 | 中文核心 |
62
| 基于workbench的高压圆盘气体轴承三维流场分析 | 郭良斌 | 润滑与密封 | 中文核心 |
63
| 轧机AGC液压缸智能检测系统平台研发 | 郭媛 | 机床与液压 | 中文核心 |
64
| 激光熔覆NbMoTaWV难熔高熵合金涂层的高温氧化行为 | 蔡召兵 | 材料导报 | 中文核心 |
65
| 搭接工艺对选区激光熔化镍基单晶高温合金 DD491 晶体取向与微观组织的影响 | 李伟 | 金属学报 | 中文核心 |
66
| 岸电箱插头辅助插拔装置设计研究 | 刘源泂 | 机械设计与制造 | 中文核心 |
67
| 封头焊缝的X射线图像分割与增强方法研究 | 刘源泂 | 机械设计与制造 | 中文核心 |
68
| 基于ResNet50和改进注意力机制的船舶识别算法 | 刘源泂 | 计算机应用 | 中文核心 |
69
| 自适应动模式分解和GA-SVM在行星轴承故障分类中的应用 | 党章 | 工程科学学报 | 中文核心 |
70
| 一种双梁互补式光纤光栅位移传感器及在地铁隧道变形监测中的应用 | 郭永兴 | 光电子、激光 | 中文核心 |
71
| 增敏型光纤布拉格光栅锚索测力传感器 | 郭永兴 | 激光与光电子学进展 | 中文核心 |
72
| 面向复杂空间路径的焊接机器人运动学分析与轨迹规划 | 余震 | 武汉科技大学学报 | 中文核心 |
73
| 基于ANSYS的塔形井架力学分析及检测方案优化 | 许仁波 | 机械设计 | 中文核心 |
74
| MSMA驱动器特性及非线性控制策略研究 | 许仁波 | 现代制造工程 | 中文核心 |
75
| 单目球形靶标球心成像坐标求解方法 | 刘源泂 | 激光与光电子学进展 | 中文核心 |
76
| 光切面法的电力钢管塔法兰肋板焊缝三维重构 | 刘源泂 | 机械设计与制造 | 中文核心 |
77
| 采用HHT与CNN的刀具磨损状态监测 | 段现银 | 组合机床与自动化加工技术 | 中文核心 |
78
| 镍基高温合金选区激光熔化成形工艺实验研究 | 段现银 | 粉末冶金工业 | 中文核心 |
79
| 电磁直线振动筛湿法筛分工艺参数优化研究 | 张泽琳 | 矿业研究与开发 | 中文核心 |
80
| 基于改进SGM的废旧机械零件彩色三维重建方法 | 张泽琳 | 激光与光电子学进展 | 中文核心 |
81
| 基于GASA-BP的轧辊内部缺陷检测方法 | 王蕾 | 武汉科技大学学报 | 中文核心 |
82
| 基于K-H-Mine算法的废旧机械产品失效信息与再制造加工方案关联规则挖掘 | 王蕾 | 现代制造工程 | 中文核心 |
83
| 基于三维点云转换视觉图像的回环检测算法 | 蒋林 | 组合机床与自动化加工技术 | 中文核心 |
84
| 基于分子动力学的P(VDF_(50)-TrFE_(50))高电场极化仿真 | 余震 | 武汉科技大学学报 | 中文核心 |
85
| 路面裂缝检测融合分割方法 | 雷斌 | 无损检测 | 中文核心 |
86
| 基于运动线索的单目绝对深度测量 | 蒋林 | 组合机床与自动化加工技术 | 中文核心 |
87
| 基于高斯模糊和BP神经网络的汽车液压转向系统故障诊断 | 郭媛 | 液压与气动 | 中文核心 |
88
| 基于非接触自适应阻抗控制的液压机械臂主/被动联合柔顺控制 | 蒋林 | 武汉科技大学学报 | 中文核心 |
89
| 语义地图中语义物体免疫遮挡定位算法 | 蒋林 | 组合机床与自动化加工技术 | 中文核心 |
90
| 基于改进SIFT 的室内机器人惯性视觉定位系统 | 蒋林 | 组合机床与自动化加工技术 | 中文核心 |
91
| 基于双目视觉的纸箱识别与规格尺寸确认研究 | 邹光明 | 传感器与微系统 | 中文核心 |
92
| 基于响应面法的地震仪调整平台结构优化 | 邹光明 | 轻工机械 | 中文核心 |
93
| 基于碳足迹的再制造产品供应链碳成本模型构建 | 周敏 | 物流技术 | 中文核心 |
94
| 室内墙面砂浆抹平机器人性能研究 | 周敏 | 传感器与微系统 | 中文核心 |
95
| 基于SSA-SVM的刀具寿命预测 | 周敏 | 智能计算机与应用 | 中文核心 |
96
| 抹灰机器人钢丝绳应力与疲劳分析 | 周敏 | 机械设计与制造 | 中文核心 |
97
| 高炉冷却壁冷却水管破损处理与数值模拟 | 李佳 | 中国冶金 | 中文核心 |
98
| 高炉扫描雷达驱动机构选型分析 | 李佳 | 机械设计与制造 | 中文核心 |
