| 1 | Characterization of Ultrasound Energy Diffusion Due to Small-Size Damage on an Aluminum Plate Using Piezoceramic Transducers | Sensors | 2017,17(12),2976 | SCI | Lu Guangtao, Feng Qian, Li Yourong, Wang Hao, Song Gangbing |
| 2 | Fabrication and evaluation of a protruding si-based printhead for electrohydrodynamic jet printing | Journal of Micromechanics and Microengineering | 2017,27(12) | SCI | Pan Yanqiao, Chen Xinyuan, Zeng Liangcai, Huang Yongan, Yin Zhouping |
| 3 | Exploring finger vein based personal authentication for secure IOT | Future Generation Computer Systems | 2017,77,149-160 | SCI | Lu Yu, Wu Shiqian, Fang Zhijun, Xiong Naixue |
| 4 | Mathematical modeling and evolutionary generation of rule sets for energy-efficient flexible job shops | Energy | 2017,138,210-227 | SCI | Liping Zhang, Qiuhua Tang, Zhengjia Wu, Fang Wang |
| 5 | Research on analytical bearing capacity model of active magnetic bearings based on magnetic saturation | Iet Electric Power Applications | 2017,11(9),1548-1557 | SCI | Wang Dongxiong, Wang Nianxian, Ye Chun, Chen Kuisheng |
| 6 | Laser induced breakdown spectroscopy for quantitative analysis based on low-rank matrix approximations | Journal of Analytical Atomic Spectrometry | 2017,32(11) | SCI | Yi Cancan, Lv Yong, Xiao han, Tu Shan |
| 7 |
The time asymmetric pitching effects on the energy extraction performance of a semi-active flapping wing power generator
| European Journal of Mechanics B-Fluids | 2017,66,92-101 | SCI | Zhu Jianyang, Tian Tixian |
| 8 | Modular product design based on the supply chain network | Advances in Mechanical Engineering | 2017,9(10) | SCI | Rong Zhijun, Yang Zhiwei, Li Ying, Chen Kuisheng, Dan Binbin |
| 9 | New milp model and station-oriented ant colony optimization algorithm for balancing u-type assembly lines | Computers & Industrial Engineering | 2017,112,107-121 | SCI | Li Zixiang, Kucukkoc Ibrahim, Tang Qiuhua |
| 10 | A geometric feature-based design system of full parametric association modeling of standard cam for automotive stamping dies | The International Journal of Advanced Manufacturing Technology | 2017,92(9-12),3627-3645 | SCI | Li Gui, Long Xiaoyu, Zhou Min, Xiong Hegen, Wang Wensheng |
| 11 |
Research of the indirect friction sensor for prediction of contact stress by improved inverse method in strip rolling
| Smart Materials and Structures | 2017,26(10) | SCI | Li Si, Wang Zhigang, Ruan Jinhua, Liu Changming |
| 12 |
The formation mechanism and bio-corrosion properties of ag/ha composite conversion coating on the extruded mg-2zn-1mn-0.5ca alloy for bone implant application
| Surface & Coatings Technology | 2017,35,127-135 | SCI | Hu Guangwu, Zeng Liangcai, Du Hui, Fu Xiande, Jin Xixi, Deng Meng, Zhao Yujin, Liu Xinwang |
| 13 |
A high-sensitivity fiber bragg grating displacement sensor based on transverse property of a tensioned optical fiber configuration and its dynamic performance improvement | IEEE Sensors Journal | 2017,17(18),5840-5848 | SCI | Li Tianliang, Tan Yuegang, Shi Chaoyang, Guo Yongxing, Najdovski Zoran, Ren Hongliang, Zhou Zude |
| 14 | Research combining experiment and fem analysis on sliding wear behaviors and mechanisms of tini alloy | Wear | 2017,386-387,218-222 | SCI | Wang Yunxue, Xu Renbo, Hu Shengmou, Tu Fuquan, Jin Weiwei |
| 15 | Experimental study on robustness of an eddy current-tuned mass damper | Applied Sciences | 2017,7(9),895 | SCI | Chen Junda, Lu Guangtao, Li Yourong, Wang Tao, Wang Wenxi, Song Gangbing |
| 16 | Multi-objective co-operative co-evolutionary algorithm for minimizing carbon footprint and maximizing line efficiency in robotic assembly line systems | Journal of Cleaner Production | 2017,156,124-136 | SCI | Nilakantan J Mukund, Li Zixiang, Tang Qiuhua, Nielsen Peter |
| 17 | Simultaneous calibration: a joint optimization approach for multiple kinect and external cameras | Sensors | 2017,17,7 | SCI | Liao Yajie, Sun Ying, Li Gongfa, Kong Jianyi, Jiang Guozhang, Jiang Du, Cai Haibin, Ju Zhaojie, Yu Hui, Liu Honghai |
| 18 | Design and optimization of non-circular mortar nozzles using finite volume method and taguchi method | International Journal of Advanced Manufacturing Technology | 2017,90,(9-12),1-11 | SCI | Zhou Min, Kong Lingpan, Xie Liangxi, Fu Ting, Jiang Guozhang, Feng Qianmei, Feng Qianmei |
| 19 | Quaternion singular spectrum analysis using convex optimization and its application to fault diagnosis of rolling bearing | Measurement | 2017,103,321-332 | SCI | Yi Cancan, Lv Yong, Dang Zhang, Xiao han, Yu Xun |
| 20 | Balancing stochastic two-sided assembly line with multiple constraints using hybrid teaching-learning-based optimization algorithm | Computers & Operations Research | 2017,82,102-113 | SCI | Tang Qiuhua, Li, Zixiang, Zhang Liping, Zhang Chaoyong |
| 21 | A multi-delay-and-sum imaging algorithm for damage detection using piezoceramic transducers | Journal of Intelligent Material Systems and Structures | 2016,28,(9) | SCI | Lu Guangtao, Li Yourong, Wang Tao, Xiao han, Huo Linsheng, Song Gangbing |
| 22 | Effectiveness of fiber bragg grating monitoring in the centrifugal model test of soil slope under rainfall conditions | Journal of Mountain Science | 2017,14(5),936-947 | SCI | Li Longqi, Ju Nengpan, Guo Yongxing |
| 23 | An energy consumption optimization strategy for cnc milling | International Journal of Advanced Manufacturing Technology | 2017,90(5-8),1715-1726 | SCI | Ma Feng, Zhang Hua, Cao Huajun, Hon K.K.B. |
| 24 | Cable force health monitoring of tongwamen bridge based on fiber bragg grating | Applied Science | 2017,7(4) | SCI | Dongtao Hu, Yongxing Guo, Xianfeng Chen, Congrui Zhang |
| 25 | Improved tensor-based singular spectrum analysis based on single channel blind source separation algorithm and its application to fault diagnosis | Applied Sciences-Basel | 2017,7(4) | SCI | Yang Dan, Yi Cancan, Xu Zengbin, Zhang Yi, Ge Mao, Liu Changming |
| 26 | Research on the blind source separation method based on regenerated phase-shifted sinusoid-assisted emd and its application in diagnosing rolling-bearing faults | Applied Sciences-Basel | 2017,7(4) | SCI | Yi Cancan, Lv Yong, Xiao han, You Guanghui, Dang Zhang |
| 27 | Tensor singular spectrum decomposition algorithm based on permutation entropy for rolling bearing fault diagnosis | Entropy | 2017,19(4) | SCI | Yi Cancan, Lv Yong, Ge Mao, Xiao han, Yu Xun |
| 28 | A carbon efficiency evaluation method for manufacturing process chain decision-making | Journal of Cleaner Production | 2017,148,665-680 | SCI | Zhu Shuo, Jiang Zhigang, Zhang Hua, Tian Guangdong, Wang Yanan, |
| 29 | Hydrodynamics method and its application in hot strip rolling | Steel Research International | 2017,88(4) | SCI | Si Li, Zhigang Wang , Jinhua Ruan, Changming Liu, Zengbing Xu |
| 30 | A novel scheme on multi-channel mechanical fault signal diagnosis based on augmented quaternion singular spectrum analysis | Journal of Vibroengineering | 2017,19(2),955-966 | SCI | Lv Yong, He Bo, Yi Cancan, Dang Zhang |
| 31 | Heat transfer performance of a novel double‑layer mini‑channel heat sink | Heat and Mass Transfer | 2017,53,3,929-936 | SCI | Biao Tang, Rui Zhou, Pengfei Bai, Ting Fu, Longsheng Lu, Guofu Zhou |
| 32 | Two-sided assembly line balancing problem of type i: improvements, a simple algorithm and a comprehensive study | Computers & Operations Research | 2017,79, 78-93 | SCI | Li Zixiang, Tang Qiuhua, Zhang Liping |
| 33 | A simulation-based study of dispatching rules in a dynamic job shop scheduling problem with batch release and extended technical precedence constraints | European Journal of Operational Research | 2017,257(1),13-24 | SCI | Xiong Hegen, Fan Huali, Jiang Guozhang, Li Gongfa |
| 34 | An interactive image segmentation method in hand gesture recognition | Sensors | 2017,17（2）,p253 | SCI | Chen Disi, Li Gongfa, Sun Ying, Kong Jianyi, Jiang Guozhang |
| 35 | A simplified method to calculate the rolling force in hot rolling | International Journal of Advanced Manufacturing Technology | 2017,88,(5-8),2053-2059 | SCI | Si Li, Zhigang Wang, Changming Liu, Jinhua Ruan, Zengbing Xu |
| 36 | Scenario reduction method based on output performance for condition-based maintenance optimization | Mechanics | 2017,23(5),743-749 | SCI | Qian Xinbo, Tang Qiuhua |
| 37 | Enhanced orthogonal matching pursuit algorithm and its application in mechanical equipment fault diagnosis | Shock and Vibration | 2017,(5),1-13 | SCI | Lv Yong, Luo Jie, Yi Cancan |
| 38 | Milp models and metaheuristic for balancing and sequencing of mixed-model two-sided assembly lines | European Journal of Industrial Engineering | 2017,11(3),353-379 | SCI | Nilakantan J. Mukund, Li Zixiang, Tang Qiuhua, Nielsen Peter |
| 39 | Force model and elastic deformation analysis of 20-high sendzimir mill rolls | Strength of Materials | 2017,49(1),152-161 | SCI | Wang Zh, Lei Yl, Feng Y H, Hu Hf |
| 40 | Implicit lyapunov function-based tracking control of a novel ammunition autoloader with base oscillation and payload uncertainty | Nonlinear Dynamics | 2016,87,(2),1-13 | SCI | Guo Yufei, Hou Baolin |
| 41 | Preparation of multifunctional al-mg alloy surface with hierarchical micro/nanostructures by selective chemical etching processes | Applied Surface Science | 2016,389,335-343 | SCI | Tian Shi, Jianyi Kong, Xingdong Wang, Xuewu Li |
| 42 | Multivariate empirical mode decomposition and its application to fault diagnosis of rolling bearing | Mechanical Systems and Signal Processing | 2017,103,321-332 | SCI | Lv yong, Yuan Rui, Song Gangbing |
| 43 | A novel mechanical fault diagnosis scheme based on the convex 1-d second-order total variation denoising algorithm | Applied Science | 2016,6,(12),403 | SCI | Yi Cancan, Lv Yong, ZhangDang, Xiao han |
| 44 | Design and investigation of a reusable surface-mounted optical fiber bragg grating strain sensor | IEEE Sensors Journal | 2016,16,(23),8456-8462 | SCI | Liu Zuomin, Kong Jianyi, Liu Honghai, Hu Dongtao, Qin Li |
| 45 | Modeling and optimization of cavitation on a textured cylinder surface coupled with the wedge effect | Tribology International | 2016,104,212-224 | SCI | Mao Yang, Zeng Liangcai, Lu Yan, |
| 46 |
Improved sobel algorithm for defect detection of rail surfaces with enhanced efficiency and accuracy
| Journal of Central South University | 2016,23,(11),2867-2875 | SCI | Shi Tian, Kong Jianyi, Wang Xingdong |
| 47 | A smart washer for bolt looseness monitoring based on piezoelectric active sensing method | Applied Sciences | 2016,6,(11),320 | SCI | Yin Heyue, Wang Tao, Yang Dan, Liu Shaopeng, Shao Junhua, Li Yourong |
| 48 | A mutual local-ternary-pattern based method for aligning differently exposed images | Computer Vision and Image Understanding | 2016,152,(C),67-78 | SCI | Wu Shiqian, Yang Lingxian, Xu Wangming, Zheng Jinghong, Li Zhengguo, Fang Zhijun |
| 49 | Dynamic rescheduling in fms that is simultaneously considering energy consumption and schedule efficiency | The International Journal of Advanced Manufacturing Technology | 2013,87(5-8),1-13 | SCI | Zhang Liping, Li Xinyu, Gao Liang, Zhang Guohui |
| 50 | A decision-making approach for end-of-life strategies selection of used parts | The International Journal of Advanced Manufacturing Technology. | 2016,87,5-8,1457-1464 | SCI | Zhang Xugang, Zhang Hua, Jiang Zhigang, Wang Yanhong |
| 51 | Energy consumption model and its simulation for manufacturing and remanufacturing systems. | The International Journal of Advanced Manufacturing Technology | 2016,87(5-8),1557-1569 | SCI, EI | Wang Xianlin, Luo Wei, Zhang Hua, Dan Binbin, Li Fei |
| 52 | Minimizing energy consumption and cycle time in two-sided robotic assembly line systems using restarted simulated annealing algorithm | Journal of Cleaner Production | 2016,135,508-522 | SCI | Li Zixiang, Tang Qiuhua, Zhang LiPing |
| 53 | Reliability and cost optimization for remanufacturing process planning | Journal of Cleaner Production | 2016,135,(4),1602-1610 | SCI | Jiang Zhigang, Zhou Tingting, Zhang Hua, Wang Yan, Cao Huajun, Tian Guangdong |
| 54 | Bolt looseness detection based on piezoelectric impedance frequency shift | Applied Sciences | 2016,6,(10),298 | SCI | Shao junhua, Wang Tao, Yin heyue |
| 55 | A three-axis force fingertip sensor based on fiber bragg grating | Sensors and Actuators A, Physical | 2016,249(10)141-148 | SCI | Guo Yongxing, Kong Jianyi, Liu Honghai, Xiong Hegen, Li Gongfa, Qin Li |
| 56 | A framework of timestamp replantation for panorama video surveillance | Multimedia Tools and Applications | 2016,75,(17),10357-10381 | SCI | Xinguo Yu, Jun Cheng, Shiqian Wu, Wu Song |
| 57 | Effect of wind fluctuating on self-starting aerodynamics characteristics of vawt | Journal of Central South University | 2016,23(8)2075-2082 | SCI | Jianyang Zhu, Lin Hang, Hui Zhao |
| 58 | Partial slip contact modeling of heterogeneous elasto-plastic materials | International Journal of Mechanical Sciences | 2016,114,98-110 | SCI | Q Dong, K Zhou, Ww Chen, Q Fan |
| 59 | Effect of nanostructure on rapid boiling of water on a hot copper plate:a molecular dynamics study | Heat and Mass Transfer | 2016,52,8,1469-1478 | SCI | Ting Fu, Yijin Mao, Yong Tang, Yuwen Zhang, Wei Yuan |
| 60 | An effective discrete artificial bee colony algorithm with idle time reduction techniques for two-sided assembly line balancing problem of type-ii | Computers & Industrial Engineering | 2016,97,146-156 | SCI | Li Zixiang, Tang Qiuhua, Zhang LiPing |
| 61 | Remarks on normalized solutions for l2-critical kirchhoff problems | Taiwanese Journal of Mathematics | 2016,20(3) | SCI | Zeng Yonglong, Chen Kuisheng |
| 62 |
Balancing mixed-model assembly lines with sequence-dependent tasks via hybrid genetic algorithm | Journal of Global Optimization | 2016,65,(1),83-107 | SCI | Q Tang , Y Liang, L Zhang, CA Floudas, X Cao |
| 63 | Behavior of micro-cycle lubrication generated by a grid-textured surface | Proceedings of The Institution of Mechanical Engineers Part J-Journal of Engineering Tribology | 2015,230(5),600-610 | SCI | Lu Yan, Liu Zuomin |
| 64 | The case-library method for service composition and optimal selection of big manufacturing data in cloud manufacturing system | The International Journal of Advanced Manufacturing Technology | 2015,84(1-4),59-70 | SCI | Xiang Feng, Jiang Guozhang, Xu Lulu, Wang Nianxian |
| 65 | Multi-objective optimization method of precision forging process parameters to control the forming quality | The International Journal of Advanced Manufacturing Technology | 2015,83(9-12),1763-1771 | SCI | Zhu Fayuan, Wang Zhaohui, Lv Mi |
| 66 | A novel in-situ nanostructure forming route and its application in pool-boiling enhancement | Experimental Thermal and Fluid Science | 2016,72,140-148 | SCI | Longsheng Lu, Ting Fu, Yong Tang, Tao Tang, Biao Tang, Zhenping Wan |
| 67 | A selective fuzzy artmap ensemble and its application to the fault diagnosis of rolling element bearing | Neurocomputing | 2016,182,(C),25-35 | SCI | Xu Zengbing, Li Youyong, Wang Zhigang, Xuan Jianping |
| 68 | Health monitoring of bolted joints using time reversal method and piezoelectric transducers | Smart Materials and Structures | 2016,25,(2),025010 | SCI | W Tao, L Shaopeng, S Junhua, L Yourong |
| 69 | Research on mechanical fault diagnosis scheme based on improved wavelet total variation denoising | Shock & Vibration | 2016,2016,(174),1-10 | SCI | Wentao He, Cancan Yi, Yourong Li, Han Xiao |
| 70 | Minimizing the cycle time in two-sided assembly lines with assignment restrictions: improvements and a simple algorithm | Mathematical Problems In Engineering | 2016 | SCI | Tang Qiuhua, Li Zixiang, Zhang Liping, |
| 71 | Robust kernelized local information fuzzy c-means clustering for brain magnetic resonance image segmentation | J.X-Ray Science and Technology | 2016,24,(3),489-507 | SCI | Elazab, Ahmed, Yousry M. AbdulAzeem, Shiqian Wu, Qingmao Hu |
| 72 | A fault diagnosis scheme for rolling bearing based on particle swarm optimization in variational mode decomposition | Shock & Vibration | 2016,2016,(2),1-10 | SCI | Yi Cancan, Lv Yong, Dang Zhang |
| 73 | A novel clustering method combining art with yu's norm for fault diagnosis of bearings | Shock and Vibration | 2016 | SCI | Xu Zengbing, Li Yourong, Wang Zhigang, Xuan Jianping |
| 74 | Object tracking based on bit-planes | J. Electronic Imaging | 2016,25,(1),013032 | SCI | Na Li, Xiangmo Zhao, Ying Liu, Daxiang Li, Shiqian Wu |
| 75 | An electricity price-dependent control-limit policy for conditionbased maintenance optimization for power generating unit | Eksploatacja I Niezawodnosc – Maintenance and Reliability | 2016,18,(2),245-253 | SCI | Qian Xinbo, Wu Yonggang |
| 76 | Detrended fluctuation analysis and hough transform based self-adaptation double-scale feature extraction of gear vibration signals | Shock and Vibration | 2016 | SCI | Wang Jiaqing, Xiao han, Lv Yong, Wang Tao, Xu Zengbing |
| 77 | Modeling surface pressure, interfacial stresses and stres intensity factors for layered materials containing multiple cracks and inhomogeneous inclusions under contact loading | Mechanics of Materials | 2016,92,8-17 | SCI | Wei Rongbing, Zhou kun, Keer leon M., Fan Qin |
| 78 | A criterion for an approximation global optimal solution based on the filled functions | Journal of Industrial and Management Optimization | 2016,12,1, 375-387 | SCI | Yuan Liuyang, Wang Zhongping, Tang Qiuhua |
| 79 | Optimization of machining parameters considering minimum cutting fluid consumption | Journal of Cleaner Production | 2015,108,183-191 | SCI | Zhigang Jiang, Fan Zhou, Hua Zhang, Yan Wang, John W.Sutherland |
| 80 | Intelligent control model and its simulation of flue temperature in coke oven | Discrete and Continuous Dynamical Systems - Series S | 2015,8(6),1223-1237 | SCI | Li Gongfa, Miao Wei, Jiang Guozhang, Fang Yinfeng, Ju Zhaojie |
| 81 | Self-starting aerodynamics analysis of vertical axis wind turbine | Advances in Mechanical Engineering | 2015,7(12) | SCI | Jianyang Zhu, Hailin Huang, Hao Shen |
| 82 | Numerical study of a variable camber plunge airfoil under wind gust condition | Journal of Mechanical Science and Technology | 2015,29(11),4681-4690 | SCI | Jianyang Zhu, Lin Jiang, Hui Zhao, Bo Tao, Bin Lei |
| 83 | Real-time image smoke detection using staircase searching-based dual threshold adaboost and dynamic analysis | Iet Image Processing | 2015,9,10, 849-856 | SCI | Yuan Feiniu, Fang Zhijun, Wu Shiqian |
| 84 | Fault diagnosis research for servo valve based on ga-bp neural network | Journal of Computational and Theoretical Nanoscience | 2015,12(9),2846-2850 | SCI | Zheng Feilong, Zeng Liangcai,Lu Yundan, Kai Gangsheng, Fu Shuguang |
| 85 | Research on steady-state simulation in dynamic job shop scheduling problem | Advances In Mechanical Engineering | 2015,7,9,1-11 | SCI | Xiong Hegen, Fan Huali, Li Gongfa, Jiang Guozhang |
| 86 | Finite element simulation based plate edging model for plan view pattern control during wide and heavy plate rolling | Ironmaking & Steelmaking | 2015,42(8),585-593 | SCI | Jh Ruan, Lw Zhang, Zg Wang, T Wang, Yr Li, Zq Hao |
| 87 | Effective hybrid teaching-learning-based optimization algorithm for balancing two-sided assembly lines with multiple constraints | Chinese Journal of Mechanical Engineering (English Edition) | 2015,28(5),1067-1079 | SCI | Tang Qiuhua, Li Zixiang, Zhang Liping, Floudas. C. A, Cao Xiaojun |
| 88 | Morphology and coupling of environmental boundaries in an iron and steel industrial system for modelling metabolic behaviours of mass and energy. | Journal of Cleaner Production | 2015,100,247-261 | SCI | Zhao Gang, Zhang Hua, Zhang Guangjun, Guo Liming |
| 89 | Numerical simulation of the influence factors for rotary kiln in temperature field and stress field and the structure optimization | Advances in Mechanical Engineering | 2015,7(6) | SCI | Li Gongfa, Liu Ze, Jiang Guozhang, Liu Honghai, Xiong Hegen |
| 90 | Dynamic simulation and research on hydraulic guide system of automatic vertical drilling tool | Materials Research Innovations | 2015,19(6),170-174 | SCI | Lu Yd, Zeng Lc, Zheng Fl, Kai Gs |
| 91 | An integrated model for remanufacturing process route decision | International Journal of Computer Integrated Manufacturing | 2015,28,(5),451-459 | SCI | Xugang Zhang, Hua Zhang, Zhigang Jiang, Yanhong Wang |
| 92 | Numerical simulation of temperature field and thermal stress field in the new type of ladle with the nanometer adiabatic material | Advances In Mechanical Engineering | 2015,7,4 | SCI | Li Gongfa, Liu Jia, Jiang Guozhang, Liu Honghai |
| 93 | Scale and orientation invariant text segmentation for born-digital compound images | IEEE Trans. Cybernetics | 2015,45(3),533-547 | SCI | Yang Huan, Wu Shiqian, Deng Chenwei, Lin Weisi |
| 94 | Development and operation of a fiber bragg grating based online monitoring strategy for slope deformation | Sensor Review | 2015,35(4),348-356 | SCI | Guo Yongxing, Dongsheng, Fu Jianjun, Liu Shaobo, Zhang Shengzhuo, Zhu Fangdong |
| 95 | Optimal grasp planning of multi-fingered robotic hands: a review | Applied and Computational Mathematics | 2015,14,3,238-247 | SCI | Miao Wei, Li Gongfa, Jiang Guozhang, Fang Yinfeng, Ju Zhaojie, Liu Honghai |
| 96 | Multi-objective optimization method of precision forging process parameters based on response surface method | Advances in Materials Science and Engineering | 2015,2015(6),1-7 | SCI | Zhu Fayuan, Wang Zhaohui, Lv Mi |
| 97 | Fault diagnosis of rolling bearing based on fast nonlocal means and envelop spectrum | Sensors | 2015,15(1),1182 | SCI | Lv Yong, Zhu Qinglin, Yuan Rui |
| 98 | Weighted guided image filtering | IEEE Trans. Image Processing | 2014,24(1),120-129 | SCI | Li Zhengguo, Zheng Jinghong, Zhu Zijian, Yao Wei, Wu Shiqian |
| 99 | Study on mechanism and experiment of water treatment by electro-hydraulic power impulse technology | Desalination and Water Treatment | 2014,52,6914-6919 | SCI | Zhaohui Wang, Quanjie Gao, Zhenfang Liao, Zhiyong Xia, Shengfan Yang |
| 100 | Effect of flexibility on flapping wing characteristics under forward flight | Fluid Dynamics Research | 2014,46(5), | SCI | Zhu Jianyang, Zhou Chaoying, Wang Chao, Jiang Lin |
| 101 | Quantitatively measurement and analysis of residual stresses in molded aspherical glass lenses | The International Journal of Advanced Manufacturing Technology | 2014,74(9-12),1167-1174 | SCI | Bo Tao, Peng He, Lianguan Shen, Yi Allen |
| 102 | Exposure-robust alignment of differently exposed images | IEEE Signal Processing Letters | 2014,21(07),885-889 | SCI | Shiqian Wu, Zhengguo Li, Jinghong Zheng |
| 103 | The aerodynamic performance of flexible wing in plunge | Journal of Mechanical Science and Technology | 2014,28(7),2687-2695 | SCI | Zhu Jianyang, Zhou Chaoying |
| 104 | The biomimetic shark skin optimization design method for improving lubrication effect of engineering surface | Journal of Tribology | 2014,136(03) | SCI | Yan Lu, Meng Hua, Zuomin Liu |
| 105 | Development of an optimal method for remanufacturing process plan selection | Journal of Advanced Manufacturing Technology | 2014,72(9-12),1551-1558 | SCI | Zhigang Jiang, Zhou Fan, John W. Sutherland, Hua Zhang, Xugang Zhang |
| 106 | Damage research of magnesia carbon refractory | Materials Research Innovations | 2014,18,S2162-S2166 | SCI | Changming Liu, Zhigang Wang, Yourong |
| 107 | A case-based reasoning method for remanufacturing process planning | Discrete Dynamics in Nature and Society | 2014,(5) | SCI | Zhou Fan, Zhigang Jiang, Hua Zhang, Yan Wang |
| 108 | A piezoelectric active sensing method for detection of bolt load loss | Sensor Review | 2014,34(07),337-342 | SCI | Shaopeng Liu, Yourong Li, Tao Wang, Yi Luo |
| 109 | A three-dimensional fusion prediction model for fractal rough surfaces in the sliding contact process | Industrial Lubrication and Tribology | 2014, 6(3), 459-467 | SCI | Lu Yan, Liu Zuomin |
| 110 | Calculation and analysis of the force in roll system of 20-high sendzimir mill | Journal of Iron and Steel Research, International | 2013,20(9),33-39 | SCI | Wang Zhaohui, Gao Quanjie, Yan Chao, Xia Zhiyong, Zhang Yaobing |
| 111 | Proof-of-concept study of monitoring bolt connection status using a piezoelectric based active sensing method | Smart Materials and Structures | 2013,22(8),17-21 | SCI | Tao Wang, Gangbing Song, Zhigang Wang, Yourong Li |
| 112 | Coke oven intelligent integrated control system | Applied Mathematics & Information Sciences | 2013,7(3),1043-1050 | SCI | Gongfa Li, Peixin Qu, Jianyi Kong, Guozhang Jiang, Liangxi Xie, Po Gao |
| 113 | Intelligent control of air compressor production process | Applied Mathematics & Information Sciences | 2013,7(3),1051-1058 | SCI | Gongfa Li, Yuesheng Gu, Jianyi Kong, Guozhang Jiang, Liangxi Xie, Zehao Wu, Zhen Li, Yuan He, Po Gao |
| 114 | Influence of working lining parameters on temperature and stress field of ladle | Applied Mathematics & Information Sciences | 2013,7(2),439-448 | SCI | Gongfa Li, Peixin Qu, Jianyi Kong |
| 115 | Review of bolted connection monitoring | International Journal of Distributed Sensor Networks | 2013,(2),1-8 | SCI | Tao Wang, Gangbing Song, Shaopeng Liu, Yourong Li, Han Xiao |
| 116 | Optimal acquisition and inventory control for a remanufacturing system | Discrete Dynamics in Nature and Society | 2013,(15),206-226 | SCI | Jiang Zhigang, Zhu Shuo, Zhang Hua, Wang Yanhong |
| 117 | Innovative method on simulating the damage mechanism of the refractory | ISIJ International | 2013,53(7),1275-1279 | SCI | Changming Liu, Zhigang Wang, Yourong Li |
| 118 | Damage pattern recognition and feature extraction of mgo-c refractory | ISIJ International | 2013,53(7),1280-1285 | SCI | Changming Liu, Zhigang Wang, Yourong Li |
| 119 | A novel baseline correction method using convex optimization framework in laser-induced breakdown spectroscopy quantitative analysis | Spectrochimica Acta Part B-Atomic Spectroscopy | 2017,138, 72-80 | SCI | Lv Yong, Yi cancan, Ke ke, Xiao han, Yun xun |
| 120 | Weighted-average l(1) filtering for switched positive systems | International Journal of Robust and Nonlinear Contro | 2017,27,18,5097-5112 | SCI | Ren yu, Sun Guanghui, Feng Zhiguang, Wu Shiqian, Er MengJoo |
| 121 | An improved inverse method by envelope fitting for prediction of contact stresses in strip rolling | Journal of The Brazilian Society of Mechanical Sciences and Engineering | 2017,39(12),5219-5227 | SCI | Li Si, Wang Zhigang, Xiao Jinhui, Ruan Jinhua, Liu Changming, Xu Zengbing |
| 122 | Lateral traction of laminar flow between sliding pair with heterogeneous slip/no-slip surface | Aip Advances | 2017,7,11 | SCI | Wu Zhenpeng, Zeng Liangcai, Chen Xiaolan, Chen Keying |
| 123 | A fault feature characterization based method for remanufacturing process planning optimization | Journal of Cleaner Production | 2017,161,708-719 | SCI | Han Wang, Zhigang Jiang, Xugang Zhang |
| 124 | New non-negative sparse feature learning approach for content-based image retrieval | Iet Image Processing | 2017,11,9, 724-733 | SCI | Xu Wangming, Wu Shiqian, Er Meng Joo, Zhang Chaobing, Qiu Yimin |
| 125 | Rules-based heuristic approach for the u-shaped assembly line balancing problem | Applied Mathematical Modelling | 2017,48, 423-439 | SCI | Li Ming, Tang Qiuhua, Zheng Qiaoxian, Xia Xuhui, Floidas |
| 126 | The improved hamming number method to detect isomorphism for kinematic chain with multiple joints | Journal of Advanced Mechanical Design Systems and Manufacturing | 2017,11,5 | SCI | Sun Wei, Kong Jianyi, Sun Liangbo |
| 127 | Based on soft competition art neural network ensemble and its application to the fault diagnosis of bearing | Mathematical Problems In Engineering | 2017, | SCI | Yang Dan, Xu Zengbing, Wang Zhigang, Yi Cancan, Liu Changming |
| 128 | An approach for blank dimension design considering energy consumption | The International Journal of Advanced Manufacturing Technology. | 2016.87.5-8,1229-1235 | SCI | Xiao Yongmao, Zhang Hua, Jiang Zhigang |
| 129 | Co-evolutionary particle swarm optimization algorithm for two-sided robotic assembly line balancing problem | Advances In Mechanical Engineering | 2016,8,9 | SCI | LiZixiang, Janardhanan Mukund Nilakantan, Tang Qiuhua, Nielsen Peter |
| 130 | Estimation of distribution algorithm for energy-efficient scheduling in turning processes | Sustainability | 2016,8,8, 762 | SCI | Wang Fang, Rao Yunqing, Zhang Chaoyong, Tang Qiuhua, Zhang Liping |
| 131 | Research on analytical model and design formulas of permanent magnetic bearings based on halbach array with arbitrary segmented magnetized angle | Journal of Magnetism and Magnetic Materials | 2016,410,257-264 | SCI | Nianxian Wang, Dongxiong Wang, Kuisheng Chen, Huachun Wu |
| 132 | Numerical study of flow field on molten iron desulfurization with mechanical stirring | Advances In Mechanical Engineering | 2016,8,7 | SCI | Xiao Linwei, Chen Kuisheng, Dan Binbin, Rong Zhijun, Wang Rui |
| 133 | A class of parameter-free filled functions for box-constrained system of nonlinear equations | Acta Mathematicae Applicatae Sinica-English Series | 2016,32,2, 355-364 | SCI | Yuan Liuyang, Wang Zhongping, Tang Qiuhua, Zheng Yue |
| 134 | A new family of bricard-derived deployable mechanisms | Journal of Mechanisms and Robotics-Transactions of The Asme | 2016,8(3),SI | SCI | Hailin Huang, Bing Li, Jianyang Zhu, Xiaozhi Qi |
| 135 | More milp models for integrated process planning and scheduling | International Journal of Production Research | 2016,54,14, 4387-4402 | SCI | Tang Qiuhua, Zhang Chaoyong, Jin Liangliang, Shao Xinyu, Tian Guangdong |
| 136 | Wireless smart sensor networks, system, trends, and the applications in engineering | Journal of Sensors | 2015 , 2016 ,1-3 | SCI | Chen Tinggui, Li Gongfa, Yang Jianjun, Liu Honghai |
| 137 | Development of dynamic energy benchmark for mass production in machining systems for energy management and energy-efficiency improvement | Applied Energy | 2017,202,715-725 | SCI | Cai Wei, Liu Fei, Zhang Hua, Liu Peiji, Tuo Junbo |
| 138 | Research on the method of step feature extraction for eod robot based on 2d laser radar | Discrete and Continuous Dynamical Systems-Series S | 2015,8,6,1415-1421 | SCI | Yin Qiang, Li Gongfa, Zhu Jianguo |
| 139 | A multichannel surface emg system for hand motion recognition | International Journal of Humanoid Robotics | 2015,12,2,1550011- | SCI | Fang Yinfeng, Liu Honghai, Li Gongfa, Zhu Xiangyang |
| 140 | Atomic structure and energy distribution of collapsed carbon nanotubes of different chiralities | Journal of Nanomaterials | 2015,1,1 | SCI | Baimova Julia A, Fan Qin, Zeng Liangcai, Wang Zhigang, Dmitriev Sergey V, Feng Xiqiao, Zhou Kun |
| 141 | Efpi-fbg hybrid sensor for simultaneous measurement of high temperature and large strain | Chinese Optics Letters | 2014,12(12) | SCI | Li Xiong, Dongsheng Zhang, Litong Li, Yongxing Guo |
| 142 | Selectively detail-enhanced fusion of differently exposed images with moving objects | IEEE Transactions On Image Processing | 2014,23,10,4372-4382 | SCI | Li Zhengguo, Zheng Jinghong, Zhu Zijian, Wu Shiqian |
| 143 | Robust optimization and stochastic programming approaches for medium-term production scheduling of a large-scale steelmaking continuous casting process under demand uncertainty
| Computers & Chemical Engineering | 2014,66, 165-185 | SCI | Ye Yun, Li Jie, Li Zukui, Tang Qiuhua, Xiao Xin, Floudas C.A |
| 144 | A novel filled function method for nonlinear equations | Journal of Applied Mathematics | 2014 | SCI | Yuan Liuyang, Tang Qiuhua |
| 145 | A method of multi-dimensional information spatial partitioning and intelligent communication path planning of metallurgical equipment | Applied Mathematics & Information Sciences | 2013,7,2 583-593 | SCI | Kong Jianyi, Liu Junwei, Li Yongbing, Wang Xingdong, Zhou Min |
| 146 | Station ant colony optimization for the type 2 assembly line balancing problem | International Journal of Advanced Manufacturing Technology | 2013,66,9-12,1859-1870 | SCI | Zheng Qiuxian, Li Ming, Li Yuanxiang, Tang Qiuhua |
| 147 | A decision making model for blank dimension based on energy optimization | International Journal of Earth Sciences and Engineering | 2015,8(5),2521-2526 | EI | Xiao, Yongmao; Zhang, Hua; Jiang, Zhigang |
| 148 | A decision-making method for active remanufacturing time based on environmental and economic indicators | International Journal of Online Engineering | 2016,12(12),32-37 | EI | Xiang, Qin; Zhang, Hua; Jiang, Zhigang; Zhu, Shuo; Yan, Wei |
| 149 | A decomposition model for the macroscopic flow field in a kambara reactor | International Journal of Simulation: Systems, Science and Technology | 2016,17(4).6.1-6.6 | EI | Xiao, Linwei; Chen, Kuisheng; Dan, Binbin; Rong, Zhijun |
| 150 | A feature extraction method of gear fault based on the SVD EMD and morphology | Applied Mechanics and Materials | 2013,433-435,477-482 | EI | Hou Gaoyan, Lv Yong, Huang Hao, Zhu Yi |
| 151 | A hybrid approach of rough set and case-based reasoning to remanufacturing process planning | Journal of Intelligent Manufacturing | 2016,1-14 | EI | Jiang, Zhigang; Jiang, Ya; Wang, Yan; Zhang, Hua; Cao, Huajun |
| 152 | A hybrid gravitational search algorithm for two-sided assembly line balancing problem with zoning constraints | ICIC Express Letters, Part B: Applications | 2016,7,12，2633-2640 | EI | Wu Yi，Tang Qiuhua，Zhang Liping |
| 153 | A hybrid particle swarm optimization algorithm for large-sized two-sided assembly line balancing problem | ICIC Express Letters | 2014,8,7,1981-1986 | EI | Tang Qiuhua，Li Zixiang，Zhang Liping，Floudas Christodoulos A |
| 154 | A measuring method of steel plate defect uncertain correlation information based on rough set and functional dependency | Sensors and Transducers | 2013，,21， 100-104 | EI | Liu Junwei，Kong Jianyi，Wang Xingdong |
| 155 | A Multi-source and Dynamic Energy Modeling Method of Machining Tools Based on BPMN and its Application | Journal of Mechanical Engineering | 2017,53(11),195-202 | EI | Yan Wei, Zhang Hua,Jiang Zhigang |
| 156 | A new design method based on feature reusing of the non-standard cam structure for automotive panels stamping dies | Journal of Intelligent Manufacturing | 2017, 1-16 | EI | Li Gui，Long Xiaoyu，Zhou Min |
| 157 | A new manufacturing resources integration and sharing modes in big data environment | The 11th IEEE Conference on Industrial Electronics and Applications | 2016 ,1984-1987 | EI | Xiang Feng,Chen Xiaowu,Jiang Guozhang |
| 158 | A Novel Scenario Reduction Method by 3D-Outputs Clustering for Condition-Based Maintenance Optimization | International Journal of Reliability | 2017,24,4 | EI | Qian Xinbo,Tang Qiuhua,Tao Bo |
| 159 | A protégé semantic modelling approach for combination correlation of manufacturing service | INTERNATIONAL JOURNAL OF Service and Computing Oriented Manufacturing | 2017, 3(1):13-23 | EI | Xiang Feng, Liu Jiangchun, Jiang Guozhang, Chen Xiaowu |
| 160 | A review of gesture recognition based on computer vision | The 10th International Conference on Intelligent Robotics and Applications | 2017，10462 ，528-538 | EI | Li Bei, Li Gongfa, Sun Ying, Jiang Guozhang, Kong Jianyi, Ju Zhaojie, Jiang, Du |
| 161 | A review of rehabilitation robot | Proceedings - 2017 32nd Youth Academic Annual Conference of Chinese Association of Automation | 2017， 907-911 | EI | Li Bei，Li Gongfa，Sun Ying，Jiang Guozhang，Kong Jianyi，Jiang Du |
| 162 | A review of upper and lower limb rehabilitation training robot | Lecture Notes in Computer Science | 2017，10462 ， 570-580 | EI | Hu Wenlong，Li Gongfa，Sun Ying，Jiang Guozhang，Kong Jianyi，Ju Zhaojie，Jiang Du |
| 163 | A robust method for aligning large-photometric-variation and noisy images | 17th International Workshop on Multimedia Signal Processing | 2015 | EI | Wu Shiqian, Xu Wangming, Jiang Jun, Qiu Yimin, Zeng Liangcai |
| 164 | Adaptive dispatching rule for job shop scheduling problem via gene expression programming | ICIC Express Letters | 2016,10,4， 923-928 | EI | Zhang Liping，Tang Qiuhua，Zheng Peng |
| 165 | Adaptive fuzzy sliding mode control algorithm simulation for 2-DOF articulated robot | Int. J. Wireless and Mobile Computing | 2018 , 13 (4) :306 | EI | Du Feng, Sun Ying, Li Gongfa, Jiang Guozhang, Kong Jianyi, Jiang Du |
| 166 | Adaptive PID controller for cloud smart city system stability control based on chaotic neural network | Cluster Computing | 2017,1-9 | EI | Xuebiao Zhu, Kuisheng Chen, Yanan Wang, Huasheng Zheng |
| 167 | Adaptive tensor morphology and its application in bearing failure diagnosis | International Conference on Energy Equipment Science and Engineering | 2015,3,2323-2329 | EI | Wang Longshen, Lv Yong, Yuan Rui |
| 168 | Aerodynamic performance of time asymmetric flapping of a three-dimensional flapping hovering bionic wing | Hangkong Dongli Xuebao/Journal of Aerospace Power | 2017,32,4，858-864 | EI | Zhu Jian-Yang，Jiang Lin，Lei Bin |
| 169 | Aligning multi-exposed images: What are the good feature and similarity measure | the 2015 10th IEEE Conference on Industrial Electronics and Applications | 2015,1959-1963 | EI | Wu Shiqian, Li Zhengguo, Zheng Jinghong, Zhu Zijian |
| 170 | An Approach of Systematic Engineering of Green Manufacturing
Based on Optimization of Resources and Environmental Attributes
for General Productions in Job Shop | Applied Mechanics and Materials | 2014, 532, 650-653 | EI | Gang Zhao,Liming Guo,Zhang Zhang,Yexiang Zhang |
| 171 | An economic model of integration framework of lean production and green manufacturing based on sustainability balanced scorecard | Boletin Tecnico/Technical Bulletin | 2017,55，（12）,263-269 | EI | Zhu Xiaoyong, Zhang Hua,Wu Chao, Huang Zhe |
| 172 | An energy-balanced WSN algorithm based on active hibernation and data recovery | Lecture Notes in Computer Science | 2015，9528，730-743 | EI | Liu Changming，Fu Cai，Xu Deliang，Sun Lin，Han Lansheng |
| 173 | An integrated solution for compression-molded glass lenses | Proceedings of SPIE - The International Society for Optical Engineering | 2016 , 10021 | EI | Tao Bo,Yuan Ye,Zhou Xinlin,Chen Hua |
| 174 | An Integrated Technology of Green Planning for Workshop Layout and Machining Operations | Applied Mechanics and Materials | 2011, 121-126, 2497-2501 | EI | Gang Zhao,Hua Zhang,Zhigang Jiang,Ming Xiao |
| 175 | Analysis on supporting stability for track subgrade dynamic response in-situ test device based on NSGA-II | Telkomnika - Indonesian Journal of Electrical Engineering | 2013,11,12,7235-7242 | EI | Zeng Liangcai,Zheng Feilong,Kai Gangsheng |
| 176 |
Analysis and design of PLC-based control system for automatic beverage filling machine | Advance Journal of Food Science and Technology | v 7, n 1, p 28-31, 2015 | EI | Zeng, Liangcai; Zheng, Feilong; Kai, Gangsheng |
| 177 | Analyzing exerted forces on a roll system of 20-high Sendzimir mill in rolling process | Journal of Digital Information Management | 2013, 11(2), 120-124 | EI | Li, Gongfa; Sun, Ying; Jiang, Guozhang; Kong, Jianyi; Ju, Zhaojie; Jiang, Du |
| 178 | Application of modern simulation technology in a mechanical design course for outstanding engineers | World Transactions on Engineering and Technology Education | 2014，12,2，203-208 | EI | Sun Ying，Jiang Guozhang，Li Gongfa，Xiong Hegen，Tao Ping |
| 179 | Application of modern simulation technology in mechanical outstanding engineer training | International Journal of Emerging Technologies in Learning, | v 9, n 2, p 22-28, 2014 | EI | Liu, Jia; Sun, Yin; Jiang, Guozhang; Kong, Jianyi; Xiong, Hegen |
| 180 | Application of modern simulation technology to a theory of mechanics course intended for outstanding engineers | World Transactions on Engineering and Technology Education | v 12, n 1, p 54-59, 2014 | EI | Liu, Jia; Jiang, Guozhang; Kong, Jianyi; Xiong, Hegen; Sun, Yin; Liu, Huaiguang |
| 181 | Architecture of reverse supply chain service system | Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems | v 21, n 10, p 2720-2731, October 1, 2015 | EI | Xia, Xuhui; Xiong, Yingqing; Zhou, Min |
| 182 | Axisymmetric cone-jet model and numerical simulation for electrostatic spraying | Nongye Jixie Xuebao | v 44, n 8, p 84-89, | EI | wang,zhaohui,Jiang, Shengwei; Gao, Quanjie |
| 183 | Balancing optimization of U-shaped assembly lines based on stochastic chance constrained programming | Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS | 2016,22,4， 955-964 | EI | Tang Qiuhua，Lin Bin，He Xiaoxia，Zhang Liping，Zhang Chaoyong，Cao Xiaojun |
| 184 | Balancing two-sided assembly line with a simple and effective iterated local search algorithm | ICIC Express Letters | 2015,9,102695-2701 | EI | Li Zixiang，Tang Qiuhua，Zhang Liping，Hu Jin |
| 185 | Based on the sustainability balanced scorecard makes lean and green system integration strategy works | the 7th International Conference on Logistics and Systems Engineering | 2017,61-63 | EI | Zhu Xiaoyong, Zhang Hua, Wu Chao, Huang Zhe |
| 186 | Bearing capacity model and design method of permanent magnetic bearings based on Halbach array | Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2016,52,3，128-135 | EI | Wang Nianxian，Wang Dongxiong，Chen Kuisheng，Wu Huachun |
| 187 | Building a creative classroom system for mechanical engineering students | World Transactions on Engineering and Technology Education | 2016，14,4，473-476 | EI | Sun Ying，Cheng Wentao，Jiang Guozhang，Li Gongfa，Guo Yongxing，Xiong Hegen |
| 188 | Convenient Community Service System Based on Integrated Service Platform | 6th International Conference on Electronic, Mechanical, Information and Management Society | 2016: 743-747 | EI | Li, Gongfa; Sun, Ying; Kong, Jianyi; Jiang, Guozhang; Tang, Heng; Ju, Zhaojie; Yu, Hui; Liu, Honghai |
| 189 | Computation of grasping and manipulation for multi-fingered robotic hands | Journal of Computational and Theoretical Nanoscience | v 12, n 12, p 6192-6197, 2015 | EI | Li, Gongfa; Jiang, Guozhang; Fang, Yinfeng; Ju, Zhaojie; Liu, Honghai |
| 190 | Condition based maintenance optimization for the hydro generating unit with dynamic economic dependence | International Journal of Control and Automation | 2014,7,3,317-326 | EI | Qian Xinbo,Wu Yongguang |
| 191 | Construction and Prospect of Community Convenience System | Advances in Computer Science Research | 2016 | EI | Li, Gongfa; Sun, Ying; Kong, Jianyi; Jiang, Guozhang; Tang, Heng; Ju, Zhaojie; Yu, Hui; Liu, Honghai |
| 192 | Contrast-based stereoscopic images dehazing | the 2015 10th IEEE Conference on Industrial Electronics and Applications | 2015,597-602 | EI | Qiu Yimin, Wu Shiqian |
| 193 | Control-limit policy of condition-based maintenance optimization for multi-component system by means of monte carlo simulation | IAENG International Journal of Computer Science | 2014,41,4,269-273 | EI | Qian Xinbo |
| 194 | Damage pattern recognition of refractory materials based on k-means clustering analysis | Advanced Materials Research | 2013，602-604， 990-994 | EI | Li Xi，Wang Zhigang，Liu Changming，Han Bingqiang |
| 195 | Design and Optimal Control of Parallel Robot | Sensors and Transducers | 2013,19, 64-67 | EI | Ying Sun,Yuesheng Gu,Hegen Xiong |
| 196 | Design and Realization of Community Service System Convenient for people | Advances in Computer Science Research | 2016,748-752 | EI | Li, Gongfa; Sun, Ying; Kong, Jianyi; Jiang, Guozhang; Tang, Heng; Ju, Zhaojie; Yu, Hui; Liu, Honghai |
| 197 | Design and simulation analysis of hydrostatic supporting excitation hydraulic cylinder | Applied Mechanics and Materials | 2013,271,1,715-719 | EI | Chen Kuisheng,Fu Shuguang,Zeng Liangcai,Zheng Feilong |
| 198 | Detrended fluctuation analysis to gear's vibration signals and its application in fault classification | Zhendong Gongcheng Xuebao/Journal of Vibration Engineering | 2015,28(2),331-336 | EI | Xiao, Han; Lü, Yong; Wang, Tao |
| 199 | Development and implementation of ADM process integration analysis tool based input-output module data interface | Sensors and Transducers | 2013,158(11),319-325 | EI | Cai, Bin; Zhao, Hui |
| 200 | Development of Articulated Robot Trajectory Planning | International Journal of Computing Science and Mathematics | 2017, 8(1) :52 | EI | Li Zhe, Li Gongfa, Sun Ying, Jiang Guozhang, Kong Jianyi, Liu Honghai |
| 201 | Differential drive servo valve based on MSMA | Applied Mechanics and Materials | 2013,271(part1)858-862 | EI | Chao Yu, Kuisheng Chen, Shuguang Fu |
| 202 | Discrete cuckoo search algorithms for two-sided robotic assembly line balancing problem | Neural Computing and Applications | 2017,1-20 | EI | Li Zixiang, Dey Nilanjan, Ashour Amira S, Tang Qiuhua |
| 203 | D-S evidential theory on sEMG signal recognition | International Journal of Computing Science and Mathematics | 2017, 8 (2) :138 | EI | Ding Weiliang , Li Gongfa, Sun Ying, Jiang Guozhang, Kong Jianyi, Liu Honghai |
| 204 | Dynamic Analysis of Test Frame of Railway Subgrade Dynamic Response Test System | International Journal of Online Engineering | 2013,9,7,30-33 | EI | Zeng Liangcai,Zheng Feilong,Kai Gangsheng,Zhang Anyu |
| 205 | Effect of a flapping wing geometry on its aerodynamic performance | 2016 International Conference on Robotics and Automation Engineering | 2016，44-47 | EI | Zhu Jianyang，Lei Bin |
| 206 | Electrostatic field and atomization effect of multiple needle electrodes spraying blade | Nongye Jixie Xuebao, | v 45, n 4, p 110-116,2014 | EI | Xia, Zhiyong; Wang, Zhaohui; Wang, Wei; Qin, Tuo; Huang, Hao |
| 207 | Environmental boundary of manufacturing system: a data analysis approach for substance and energy behaviors in manufacturing system | Energy Education Science and Technology Part A: Energy Science and Research | 2014 ,32(5), 3037-3048 | EI | Gang Zhao,Hua Zhang, Ming Xiao |
| 208 | Fabrication and evaluation of a protruding Si-based printhead for electrohydrodynamic jet printing | Journal of Micromechanics and Microengineering, | v 27, n 12, October 30, 2017 | EI | Chen, Xinyuan; Zeng, Liangcai; Huang, Yongan; Yin, Zhouping |
| 209 | Fast construction method of Pareto non-dominated solution for multi-objective decision-making problem | Xitong Gongcheng Lilun yu Shijian/System Engineering Theory and Practice | 2016,36,2，454-463 | EI | Wang Fang，Rao Yunqing，Tang Qiuhua，He Xiaoxia，Zhang Liping |
| 210 | Fatigue life analysis of welded girders with trapezoidal corrugated webs | Hanjie Xuebao/Transactions of the China Welding Institution | 2015,36(2),79-82 | EI | Dong, Yafei; Wei, Guoqian; Yue, Xudong; Yu, Zhen |
| 211 | Fault Diagnosis of Hydraulic Pump Based on Symbolic Dynamics Entropy and SVM | Zhendong Ceshi Yu Zhenduan/Journal of Vibration, Measurement and Diagnosis | 2017,37,(2),288-293 | EI | Zhang Hua, Zeng Wentao, Yan Wei |
| 212 | Feature selection technology based on sample unbiased evaluation | 2015 12th International Conference on Fuzzy Systems and Knowledge Discovery | 2016,37,10， 1302-1308 | EI | Liu Huaiguang，Kong Jianyi，Wang Xingdong，Liu Yuanjiong |
| 213 | FEM Simulation of the Effect of Coefficient of Thermal Expansion and Heat Capacity on Prediction of Residual Stresses of Compression Molded Glass Lenses | IOP Conference Series: Materials Science and Engineering | 2017,269,1 | EI | Tao Bo,Yuan Ye |
| 214 | Fusion hand gesture segmentation and extraction based on CMOS sensor and 3D sensor | International Journal of Wireless and Mobile Computing | 2017, 12(3) :305 | EI | Chen Disi, Li Gongfa, Sun Ying, Jiang Guozhang, Kong Jianyi, Li Jiahan, Liu Honghai |
| 215 | Gesture recognition based on an improved local sparse representation classification algorithm | Cluster Computing | 2017，1-12 | EI | He Yang，Li Gongfa，Liao Yajie，Sun Ying，Kong Jianyi，Jiang Guozhang，Jiang Du，Tao Bo，Xu Shuang，Liu Honghai |
| 216 | Gesture recognition based on modified adaptive orthogonal matching pursuit algorithm | Cluster Computing | 2017， 1-10 | EI | Li Bei，Sun Ying，Li Gongfa，Kong Jianyi，Jiang Guozhang，Jiang Du，Tao Bo，Xu Shuang，Liu Honghai |
| 217 | Gesture Recognition Based on Sparse Representation | International Journal of Wireless and Mobile Computing | 2017 , 11 (4) :348 | EI | Miao Wei, Li Gongfa, Sun Ying, Jiang Guozhang, Kong Jianyi, Liu Honghai |
| 218 | Green Manufacturing Service Composition an Introduction | The 11th IEEE Conference on Industrial Electronics and Applications | 2016 ,1988-1993 | EI | Xiang Feng,Xu Lulu ,Jiang Guozhang |
| 219 |
Green optimization based on cellular automata for process planning and production operation in workshop
| Advanced Materials Research | 2011, 255-260, 2174-2178 | EI | Gang Zhao,Hua Zhang,Zhigang Jiang,Wei Yan,Yanhong Wang |
| 220 | Hand gesture recognition based on convolution neural network | Cluster Computing | 2017， 1-11 | EI | Li Gongfa，Tang Heng，Sun Ying，Kong Jianyi，Jiang Guozhang，Jiang Du，Tao Bo，Xu Shuang，Liu Honghai |
| 221 | Hand gesture recognition using interactive image segmentation method | Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics) | 2017，10462，539-550 | EI | Chen Disi，Li Gongfa，Kong Jianyi，Jiang Guozhang，Sun Ying，Jiang Du，Ju Zhaojie |
| 222 | Hydraulic system design and simulation of high-speed railway dynamic test system excitation device | Applied Mechanics and Materials | 2013,271,1,953-957 | EI | Zeng Liangcai,Zheng Feilong,Wang Yuan,Xi Qianghua |
| 223 | Improved discrete artificial bee colony algorithm for type I two-sided assembly line balancing problem | Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS | 2016,22,4， 974-982 | EI | Li Zixiang ，Tang Qiuhua，Zhang Liping，Zheng Peng |
| 224 | Improved Roberts operator for detecting surface defects of heavy rails with superior precision and efficiency | High Technology Letters | 2016,22,2 207-214 | EI | Shi Tian，Kong Jianyi，Wang Xingdong，Liu Zhao |
| 225 | Influence factors on Stress Distribution of Electric Furnace Roof | Sensors and Transducers | 2013, 159, 74-79 | EI | Li, Gongfa; Sun, Ying; Jiang, Guozhang; Kong, Jianyi; Ju, Zhaojie |
| 226 | Influence factors on temperature distribution of electric furnace roof | Sensors and Transducers | 2013,21(SREC.ISS.5),85-88 | EI | Li Zheng, Jiang Guozhang, Li Gongfa, Kong Jiangyi,Xie Liangxi, Li Zheng |
| 227 | Installation error calibration of gravity accelerometer with two axes for vertical drilling tool | Shiyou Xuebao/Acta Petrolei Sinica | 2016,37,10， 1302-1308 | EI | Deng Jianghong, Chen Xinyuan, Liu Baiyan, Zeng Liangcai |
| 228 | Integrated technology based on resource and environment attributes for workshop planning and production operation | Advanced Materials Research | 2011, 255-260, 2941-2918 | EI | Gang Zhao,Hua Zhang,Zhigang Jiang,Yanhong Wang,Ming Xiao |
| 229 | Intelligent computation in grasping control of dexterous robot hand | Journal of Computational and Theoretical Nanoscience | 12, n 12, p 6096-6099, January 12, 2015 | EI | Li, Gongfa; Jiang, Guozhang; Fang, Yinfeng; Ju, Zhaojie; Liu, Honghai |
| 230 | Investigation of Vanadium Containing Shale in Combustion Behavior | Advanced Materials Research | 2013，634-638,1， 775-782 | EI | Meng Kang，Chen Wangsheng，Zhang Ying，Han Jun，Wang Xingdong |
| 231 | Laboratory reliability testing design of solenoid operated directional-control valves for industrial application | 3rd International Conference on Trustworthy Systems and Their Applications | 2016,96-101 | EI | Qian Xinbo,Zhang Congchang |
| 232 | Lean and green manufacturing integration and synergy: A balanced scorecard perspective | the 6th International Conference on Logistics and Supply Chain Management | 2016,39-47 | EI | Zhu Xiaoyong, Zhang Hua, Jiang Faming, Jia Huiqiao |
| 233 | Lightweight optimization design of the hollow half shaft of steering drive axles based on response surface method | Qiche Gongcheng/Automotive Engineering | 1477-1481 and 1476,2015 | EI | Wang, Zhaohui Zhu, Fayuan; Lü, Mi; Chen, Si |
| 234 | Making the higher education different from what happened in the last decade: A strategic vision of innovation and internationalization | Advances in Education Research. | 2014, 7, | EI | Gang Zhao, Liangxi Xie, Gongfa Li |
| 235 | Mechanical Optimization Design Based on Genetic Algorithm | Sensors and Transducers | 2013,19, 19-24 | EI | Ying Sun,Yuesheng Gu,Hegen Xiong |
| 236 | Metabolic behavior based optimization of resource utilization for iron and steel productions | World
Scientific Publishing | 2016, 82-88 | EI | Zhang Zhang, Zhao Gang, Zhang Xiang |
| 237 | Middle or low water pressure direct spiral double helix converging nozzle structure optimization and flow field analysis | High Technology Letters | 2015,21(3),261-268 | EI | Jiang, Lin; Wu, Ruolin; Zhao, Hui; Mei, Peng; Zhang, Qiang; Zhu, Jiangyang; Xiao, Jun; Lei, Bin |
| 238 | Modular method of remanufacturing service resources | Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, | v 22, n 9, p 2204-2216, September 1, 2016 | EI | Xia, Xuhui; Xiong, Yingqing; Zhou, Min |
| 239 | Multi-buffered steelmaking production scheduling with heuristic rules and memetic algorithm | Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS | 2015,25,11，2955-2963 | EI | Tang Qiuhua，Zheng Peng，Zhang Liping，Zhang Qimin，Chen Li |
| 240 | Multi-objective Machining Parameters Optimization for Low Energy and Minimum Cutting Fluid Consumption | Jixie Gongcheng Xuebao | 2017,53,(11),157-163 | EI | Ma Feng, Zhang Hua, Cao Huajun |
| 241 | Multi-objective optimization method for arc welding parameters oriented to energy saving and high thermal efficiency | Jisuanji Jicheng Zhizao Xitong | 2015,21(12),3174-3181 | EI | Yan, Wei; Zhang, Hui; Zhang, Hua; Jiang, Zhigang; Xiang, Qin |
| 242 | Multi-objective Optimization Model and Application of Components Reuse Combination for Used Mechanical Equipment | Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2017,53(5),76-85 | EI | Xue Chen, Jiang Zhigang, Zhang Xugang, Wang Han |
| 243 | Multi-objective optimization of arc welding parameters: the trade-offs between energy and thermal efficiency | Journal of Cleaner Production | 2017,140,1842-1849 | EI | Yan Wei, Zhang Hua,Jiang Zhigang, Hon K.K.B. |
| 244 | Multiobjective Optimization of Precision Forging Process Parameters Based on Response Surface Method | Advances in Materials Science and Engineering | v 2015, 2015 | EI | Wang, Zhaohui; Lv, Mi |
| 245 | Multi-objective U-shaped assembly line balancing under multi-resource restriction | Jisuanji Jicheng Zhizao Xitong | 2017,23,11， 2431-2441 | EI | Zhang Zikai，Tang Qiuhua，Zhang Liping |
| 246 | Multi-scale detail-preserving tone mapping with adaptive gamma compression | 2017 2nd International Conference on Frontiers of Sensors Technologies | 2017,1-5 | EI | Wang Wei, Wu Shiqian, Zhang Qin, Er Meng Joo |
| 247 | New partial cooperation model for ill-posed bilevel programming problem via satisfactory degree | Journal of Systems Engineering and Electronics | v 27, n 1, 177-182, February 2016 | EI | Wan, Zhongping; Xia, XuhuiJia, Shihui |
| 248 | New type of rotary hydraulic servo joint | Huazhong Keji Daxue Xuebao | 2013,41(11),76-80 | EI | Zeng, Liangcai; Hu, Qi; Jiang, Lin;Zhao, Hui |
| 249 | Numerical Simulation of Flame Temperature Field in Rotary Kiln | Sensors and Transducers | 2013, 161(12), 265-270 | EI | Li, Gongfa; Sun, Ying; Jiang, Guozhang; Kong, Jianyi; Ju, Zhaojie; Jiang, Du |
| 250 | Numerical simulation of flow, temperature and phase fields in U71Mn rail-head quenching process | Computer Modelling and New Technologies | 2014,18(1),61-70 | EI | Gongfa Li, Jia Liu, Guozhang Jiang, Jianyi Kong, Liangxi Xie, Wentao Xiao, Yikun Zhang, Fuwei Cheng |
| 251 | Numerical Simulation of Stress Field and Its Influence Factors of The New
Type of Ladle | Advances in Computer Science Research | 2016 | EI | Li, Gongfa; Sun, Ying; Kong, Jianyi; Jiang, Guozhang; Tang, Heng; Ju, Zhaojie; Yu, Hui; Liu, Honghai |
| 252 | Numerical study of the contact pressure of window-type vane seals: Part i | Sealing Technology | 2015,2015(3),7-12 | EI | Xie Liangxi, Li Lu, Jiang Guozhang, Li Gongfa |
| 253 | Numerical study of the contact pressure of window-type vane seals: Part II | Sealing Technology | 2015,2015(4),9-11 | EI | Xie Liangxi, Li Lu, Jiang Guozhang, Li Gongfa |
| 254 | Operation patterns analysis of automotive components remanufacturing industry development in China | Journal of Cleaner Production | 2017,164,1363-1375 | EI | Tian Guangdong, Zhang Honghao, Feng Yixiong, Jia Hongfei, Zhang Chaoyong, Jiang Zhigang, Li Zhiwu, Li Peigen |
| 255 | Optimal design of planar linkage mechanism with tolerances of dimensional and fit | Huazhong Keji Daxue Xuebao | 2017,45,3， 23-28 | EI | Wang Xingdong，Yang Bo，Kong Jianyi，Zhang Hua |
| 256 | Optimization of Material Parameters of Electric Furnace Roof based on
Stress Distribution | Sensors and Transducers | 2013, 161, 277-280 | EI | Li, Gongfa; Sun, Ying; Jiang, Guozhang; Kong, Jianyi; Ju, Zhaojie; Jiang, Du |
| 257 | Optimization research of the comprehensive coke rate of blast furnace based on the operational characteristic of auxiliary materials | Applied Mechanics and Materials | 2013,261-262,3-9 | EI | Zhang Hua, Feng Zhaohui, Wang Yanhong |
| 258 | Planning and scheduling model of production process in iron and steel enterprise | Computer Modelling and New Technologies | v 18, n 6, p 186-191, 2014 | EI | Lei, Chongwu; Liu, Honghai; Li, Gongfa |
| 259 | Principal factor analysis for main raw materials' transformation efficiency in iron-making systems | Advanced Materials Research | 2013,655-657,2307-2312 | EI | Wang, Yanhong; Zhang, Hua; Jiang, Zhigang; |
| 260 | Production line production planning model of iron and steel enterprise | Journal of Digital Information Management | 2013,11(2),131-135 | EI | Jiang Guozhang, He Enyuan, Li Gongfa, Kong Jianyi, Xie Liangxi |
| 261 | Production procedure optimization in iron and steel enterprise | Computer Modelling and New Technologies | v 18, n 6, p 192-196, 2014 | EI | Zhang, Yikun; Jiang, Guozhang; Liu, Honghai; Liu, Jia |
| 262 | Real coded quantum genetic algorithm and its application | Journal of Engineering Science and Technology Review | 2013 , 6 (5), 25-32 | EI | Sun Ying, Xiong Hegen |
| 263 | Reform and effects of a training mode for outstanding mechanical engineers | World Transactions on Engineering and Technology Education | 2016，14,1，57-63 | EI | Li Gongfa，Liu Ze，Sun Ying，Jiang Guozhang，Kong Jianyi，Xiong Hegen |
| 264 | Reform of a mechanical design course based on simulation software | World Transactions on Engineering and Technology Education | 2014，12,3， 528-533 | EI | Sun Ying，Jiang Guozhang，Li Gongfa，Xiong Hegen，Tao Ping |
| 265 | Reform of the examination and evaluation system for the mechanical specialty in universities | World Transactions on Engineering and Technology Education | v 13, n 4, p 620-626, 2015 | EI | Jiang, Guozhang; Li, Gongfa; Xiong, Hegen; Tao, Ping |
| 266 | Rehabilitation training for leg based on EEG-EMG fusion | Lecture Notes in Computer Science | 2017， 10462， 517-527 | EI | Tang Heng，Li Gongfa，Sun Ying，Jiang Guozhang，Kong Jianyi |
| 267 | Reliability analysis of drilling mud pump pressure cylinder hydraulic system | 3rd International Conference on Trustworthy Systems and Their Applications | 2016,102-107 | EI | Gu Deliang,Chen Kuisheng,Qian Xinbo,Zhan Congchang |
| 268 | Remanufacturing scheme decision model and application based on remaining useful life estimation | Jixie Gongcheng Xuebao | 2013,49(7),51-57 | EI | Zhang, Xugang; Zhang, Hua;Jiang, Zhigang |
| 269 | Research of coke rate prediction of blast furnace based on operative characteristics of auxiliary resources | Advanced Materials Research | 2013,605-607,1792-1797 | EI | Wang, Yanhong; Zhang, Hua; Jiang, Zhigang; Zhao, Gang |
| 270 | Research on bearing capacity model of large-air-gap hybrid magnetic bearings | Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2015,51,1，153-160 | EI | Wang, Nianxian，Hu Yefa，Wu Huachun，Dong Ruhao |
| 271 | Research on calculation and measurement method of hydraulic excavator load force-time process | Applied Mechanics and Materials | 2013，401-403，1091-1094 | EI | Hu Xiao Li，Xiang Qin，Zhang Hua，Zhao Gang |
| 272 | Research on imaging system of vision measurement for the shaft | Proceedings of SPIE - The International Society for Optical Engineering | 20159815 | EI | Yang Zhao ，Wang Xingdong，Liu Yuanjiong，Liu Zhao，Gao Qing |
| 273 | Research on key technology of hydraulic servo cylinder with adaptive variable clearance | Proceedings - 2015 Chinese Automation Congress | 2016,1922-1925 | EI | Chen Kuisheng,Deng Jianghong,Zhan Congchang,Zheng Feilong |
| 274 | Research on low-friction and high-response hydraulic cylinder with variable clearance | Jixie Gongcheng Xuebao | 2015,51(24),161-167 | EI | Congchang Zhan, Jianghong Deng, Kuisheng Chen |
| 275 | Research on modified cavitation model for self-excited oscillation pulsed jet nozzle | International Conference on Mechanical, System and Control Engineering | 2017 | EI | Chen, Si; Deng, Xiaogang ,Wang, Zhaohui |
| 276 | Research on online recognition system of finished tobacco box number and key technology | Journal of Computational Information Systems | 2013,9,8,2983-2992 | EI | Liu Huaiguang,Kong Jianyi,Chen Youping |
| 277 | Research on temperature distribution model of electric furnace roof | Sensors and Transducers | 2013,21(SREC.ISS.5),95-99 | EI | Li Zheng, Jiang Guozhang, Li Gongfa, Kong Jiangyi, Xie Liangxi, Lei Chongwu |
| 278 | Research on Temperature field and Stress field of Prefabricate Block
Electric Furnace Roof' | Sensors and Transducers | 2014, 163, 228-234 | EI | Li, Gongfa; Sun, Ying; Jiang, Guozhang; Kong, Jianyi; Ju, Zhaojie |
| 279 | Research on the application technology of green planning and optimal operation for the workshop production | the International Conference on Advanced Technology of Design and Manufacture | 2012, 35(3), 397-402 | EI | Hua Zhang,Gang Zhao,Zhigang Jiang,Ming Xiao,Yanhong Wang,Xumei Zhang |
| 280 | Research on vibration analysis and structure optimization of sink roll in hot-dip galvanizing line | Huazhong Keji Daxue Xuebao | 2017,45,12，118-122 | EI | Wang Xingdong，Liu Cancan，Li Yourong，Peng Wei |
| 281 | Robust integral sliding mode controller for quadrotor flight | 2017 Chinese Automation Congress | 2017,7352-7356 | EI | Yu Hang, Wu Shiqian, Lv Qin, Zhou Yimin, Liu Siyuan |
| 282 | Rollback and compensation for an easy control hydraulic servo joint | Applied Mechanics and Materials | 2013,312,662-666 | EI | Xiaohong, Jin; Xianbao, Xiang; Lin, Jiang; Qinfen, Miao |
| 283 | Rules-based heuristic approach for the U-shaped assembly line balancing problem | Xitong Gongcheng Lilun yu Shijian/System Engineering Theory and Practice | 2016,36,(2),454-463 | EI | Wang Fang, Rao Yunqing, Tang Qiuhua, He Xiaoxia, Zhang Liping |
| 284 | Secondary recrystallisation behaviours of grain-orientated silicon steel produced by TSCR process | ronmaking and Steelmaking | 2017,1-5 | EI | Bao Siqian，Liu Bingbing，Zhao Gang，Xiao Huan，Xu Yaowen，Yang Gengwei |
| 285 | Second-order Consensus Algorithm with Input Constraints for Swarm Robots Formation Control | IEEE CSCWD 2015 | 2015, 66-72 | EI | Chen Hao, Gao Quanjie, Lei Bin, Zeng Liangcai |
| 286 | Service module matching of reverse supply chain services | Journal of Computational and Theoretical Nanoscience | v 12, n 12, 6352-6364, December 2015 | EI | Xia, Xuhui; Xiong, Yingqing; Zhou, Min; Liu, Junwei; Hu, Junfeng |
| 287 | Simulation of 2-DOF articulated robot control based on adaptive fuzzy sliding mode control | The 10th International Conference on Intelligent Robotics and Applications | 2017 :551-559 | EI | Du Feng, Li Gongfa, Li Zhe, Sun Ying, Kong Jianyi, Jiang Guozhang, Jiang Du |
| 288 | Simulation of expansion joint of bottom lining in ladle and its influence on thermal stress | International Journal of Online Engineering | 2013,9(2),5-8 | EI | Li Gongfa, Liu Jia, Jiang Guozhang, Kong Jianyi, Xie Liangxi |
| 289 | Simulation of flow field and calculation of moment on valve plate for butterfly valve | Applied Mechanics and Materials | 2013,312,186-190 | EI | Xiaohong, Jin; Yang, Shen; Qinfen, Miao |
| 290 | Simulation of temperature-field during Rail Air-cooling Quenching
Process | Lecture Notes in Computer Science | 2017，10462，570-580 | EI | Li, Gongfa; Sun, Ying; Jiang, Guozhang; Kong, Jianyi; Ju, Zhaojie; Jiang, Du |
| 291 | Single machine scheduling under uncertainty processing time with CVAR constraints | 5th International Conference on Instrumentation and Measurement, Computer, and Control | 2015,1824-1827 | EI | He Xiaoxia, Li Huan, Tang Qiuhua |
| 292 | Sliding type fiber Bragg grating displacement sensor | Guangxue Jingmi Gongcheng/Optics and Precision Engineering | 2017, 25,1，50-58 | EI | Xiong Li，Kong JianYi，Zhang ZanYun，Qin Li |
| 293 | Soft-sensing model of coke oven flue temperature | Sensors and Transducers | v 161, n 12, p 265-270, 2013 | EI | ; Xiao, Wentao; Jiang, Guozhang; Kong, Jianyi; Liu, Jia; Zhang, Yikun; Cheng, Fuwei |
| 294 | Static hand gesture segmentation: Comparison and selection of existing methods | The 32nd Youth Academic Annual Conference of Chinese Association of Automation | 2017 :889-894 | EI | Liao Yajie, Li Gongfa, Sun Ying, Jiang Guozhang, Kong Jianyi, Jiang Du, Ju Zhaojie |
| 295 | Strength study on screw assembly of food screw press based on FEA | Advance Journal of Food Science and Technology | 2015,7,3,187-190 | EI | Lu Yuandan,Zeng Liangcai,Zheng Feilong,Kai Guangsheng |
| 296 | Stress distribution model of prefabricate block electric furnace roof | Sensors and Transducers | 2013,21(SPEC.ISS.5),20-24 | EI | Liu Jia, Li Gongfa, Jiang Guozhang, Kong Jianyi, Xie Liangxi, Shi Shaoyang |
| 297 | Structure optimization of ladle bottom based on finite element method | Journal of Digital Information Management | 2013,11(2),120-124 | EI | Li Gongfa, Li Zheng, Kong Jianyi, Jiang Guozhang, Xie Liangxi |
| 298 | Studied and Their Application of Vibration Control Technologies | International Journal of Computer Science Issues | 2013, 10(2), 311-318 | EI | Ying Sun,Yuesheng Gu,Hegen Xiong |
| 299 | Study of upward deflection of RVA end-seal and development of failure preventive measures | Sealing Technology | 2017,2017(3),7-10 | EI | Jiangtao Peng, Liangxi Xie, Ting Fu, Xuan Zhang, Wenqiang Qian |
| 300 | Study on AADDS plunger pump driving bearing properties | Sensors and Transducers | 2013,158,11,443-447 | EI | Lu Yuandan,Zeng Liangcai,Zheng Feilong,Mao Ji,Jin Mingyong |
| 301 | Surface cracks analysis on continuous casting slab Q345c during hot delivery and hot charging | Advanced Materials Research | 2013，785-786， 1081-1086 | EI | Wang ShengZhao，Zhao Gang，Ba Si Qian，Chen Jian，Lu Li Wei |
| 302 | Temperature and thermal stress analysis of refractory products | Sensors and Transducers | 2013,21(SPEC.ISS.5),53-57 | EI | Shi Shaoyang, Li Gongfa, Jiang Guozhang, Xie Liangxi |
| 303 | Temperature data acquisition and remote monitoring of ladle based on LabVIEW | Computer Modelling and New Technologies | 1320-1325, 2014 | EI | Cheng, FuweiLi, GongfaLi, Honghai |
| 304 | The nonlinear vibration analysis of the fluid conveying pipe based on finite element method | Computer Modelling and New Technologies | 2014,18(4),19-24 | EI | Li Gongfa, Liu Jia, Jiang Guozhang, Kong Jianyi, Xie Liangxi, Xiao, Wentao, Zhang Yikun, Cheng Fuwei
|
| 305 |
The research on iron and steel enterprises operation model based on the characteristics of the accessories resources
| Applied Mechanics and Materials | 2013， 291-294， 2955-2959 | EI | Wang Yan Hong，Zhang Hua，Jiang Zhi Gang，Zhao Gang |
| 306 | The research on rake-car's driving system of ore reclaimer | Applied Mechanics and Materials | 2013,300-301,10-13 | EI | Yuanhui Li, Kuisheng Chen, Jianghong Deng, Xinyuan Chen |
| 307 | The Simulation and optimization of the electro-hydraulic proportional control system based on Simulink/SRO | Sensors and Transducers | 2013,21,5,1-7 | EI | Zeng Liangcai,Zheng Feilong,Kai Gangsheng,Yu Cong |
| 308 | The formation mechanism and bio-corrosion properties of Ag/HA composite conversion coating on the extruded Mg-2Zn-1Mn-0.5Ca alloy for bone implant application | Surface and Coatings Technology | v 325, p 127-135, September 25, 2017 | EI | Zeng, Liangcai; Du, Hui; Fu, Xiande; Jin, Xixi; Deng, Meng; Zhao, Yujin; Liu, Xinwang |
| 309 | Trajectory Planning and Control of Mobile Manipulator | 7th International Conference on Social Network, Communication and Education | 2017 | EI | Luo Bowen, Sun Ying, Yu Mingchao |
| 310 | Using modern design methods to improve metallurgical machinery students' innovation ability and the research of its application | International Conference on Information Management, Innovation Management and Industrial Engineering | 2012 | EI | Wang, Zhaohui |
| 311 | Weighting linear matching for stereo vision | 11th Conference on Industrial Electronics and Applications | 2016,1009-1014 | EI | Chen Bin, Wu Shiqian |
| 312 | Workspace Analysis for Parallel Robot | Sensors and Transducers | 2013, 21, 48-52 | EI | Ying Sun, Hegen Xiong |
| 313 | 滑动式光纤布拉格光栅位移传感器 | 光学精密工程 | 2017, (01), 50-58 | EI | 郭永兴, 熊丽, 孔建益, 张赞允,秦丽 |
| 314 | 新型旋转液压关节 | 华中科技大学学报(自然科学) | 2013,41(11),76-80 | 国内期刊 | 曾良才，胡琪，蒋林，赵慧 |
| 315 | 多频多幅振动压路机的参数优化及其偏心块组的设计 | 机械设计与制造 | 2013,(1),29-31 | 国内期刊 | 但斌斌，邬俊惠，容芷君，周鼎 |
| 316 | 基于 MATLAB的振动压路机橡胶减振器的参数优化分析 | 机床与液压 | 2013,(7),33-35 | 国内期刊 | 但斌斌，邬俊惠，容芷君，周鼎 |
| 317 | Entity Framework在KR脱硫自动控制系统中的应用 | 制造业自动化 | 2013,35(5),8-10 | 国内期刊 | 但斌斌，罗欢，陈奎生，熊凌，容芷君 |
| 318 | 连铸加渣机摆动机构的设计 | 机械设计与制造 | 2013,(11),70-72 | 国内期刊 | 但斌斌，李功义，周鼎，容芷君 |
| 319 | 双V形槽静电喷雾刀梁设计及流场特性研究 | 机械设计与制造 | 2013,(8),21-24 | 国内期刊 | 高全杰，夏志勇，汪朝晖，王维，章伟红 |
| 320 | 机床绿色制造系统工程的实施框架研究 | 航空制造技术 | 2013,425(5),42-47 | 国内期刊 | 江志刚，周帆，张华，张旭刚 |
| 321 | 基于协同效应的再制造工艺技术决策模型及应用 | 机械设计与制造 | 2013,(1),58-60 | 国内期刊 | 江志刚，蒋小利，张旭刚，张华，鄢威 |
| 322 | 面向再制造工艺单元重构的设备布局模型研究 | 制造技术与机床 | 2013,(12),32-35 | 国内期刊 | 朱硕，江志刚，张华，张旭刚 |
| 323 | 基于实例推理的废旧零部件可再制造性评价 | 现代制造工程 | 2013,(12),6-9 | 国内期刊 | 蒋小利，江志刚，张华，张旭刚，朱硕 |
| 324 | 蓄热式烧嘴热应力场数值模拟与破损机理分析 | 现代制造工程 | 2013,(6),111-115 | 国内期刊 | 姜繁智，孔建益，欧阳德刚，聂海金，朱善合，王兴东 |
| 325 | 间隙密封液压缸泄漏量仿真分析 | 润滑与密封 | 2013,(7),75-79 | 国内期刊 | 蒋俊，郭媛，曾良才，湛从昌，付曙光 |
| 326 | 基于CFD的蝶阀流场仿真和阀板驱动力矩研究 | 中国科技论文 | 2013,3(4),69-76 | 国内期刊 | 沈洋，金晓宏，杨科 |
| 327 | 基于动网格技术的理想液压缸运动数值计算 | 机电工程 | 2013,30(12),1445-1449 | 国内期刊 | 金晓宏，杨科，沈洋 |
| 328 | 非径向对称带状载荷作用下有限长圆柱体的应力和位移解 | 武汉科技大学学报 | 2013,36(4),269-276 | 国内期刊 | 金晓宏，陈义 |
| 329 | 非对称载荷作用下有限长圆柱体应力和位移解 | 中国科技论文在线 | 2013 | 国内期刊 | 金晓宏，陈义，李光杰 |
| 330 | 基于轧机辊缝控制系统的相关参数研究 | 中国科技论文在线 | 2013 | 国内期刊 | 黄虎跃，金晓宏 |
| 331 | 轧机辊缝控制系统的仿真研究 | 中国科技论文在线 | 2013 | 国内期刊 | 黄虎跃，金晓宏 |
| 332 | 两级轴流血泵CFD性能仿真 | 机床与液压 | 2013,41(13),151-154 | 国内期刊 | 李涛，赵慧 |
| 333 | 加热炉鼓风机在线监测系统设计 | 《机械工程师》 | 2013,(1),55-56 | 国内期刊 | 李远慧，傅连东，陈新元 |
| 334 | 比例技术在耙料机构中的应用分析 | 《装备制造技术》 | 2013,(1),170-171 | 国内期刊 | 李远慧，陈新元，邓江洪 |
| 335 | PLC在取料机液压驱动系统中的应用 | 《自动化技术与应用》 | 2013,32(3),97-98 | 国内期刊 | 李远慧，邓江洪，陈新元，黄科夫 |
| 336 | 矿料小车驱动液压系统改进 | 机床与液压 | 2013,41(14),123-133 | 国内期刊 | 李远慧，陈新元，朱学彪 |
| 337 | 基于小波能谱系数的耐火材料损伤分析 | 武汉科技大学学报 | 2013,36(1),32-35 | 国内期刊 | 赵尧杰，王志刚，刘昌明，孔建益，韩兵强 |
| 338 | 基于路径搜索的产品设计过程建模 | 计算机集成制造 | 2013,19(2),293-299 | 国内期刊 | 胡从林，容芷君，陈奎生，但斌斌 |
| 339 | 公理设计在产品设计中的研究综述 | 机械设计 | 2013,30(2),1-9 | 国内期刊 | 刘悦，容芷君，但斌斌 |
| 340 | 车身产品设计中的多层次尺寸链构建 | 计算机辅助设计与图形学学报 | 2012,24(11),001394-1398 | 国内期刊 | 容芷君，陈少云，陈奎生，张振炎 |
| 341 | 输出耦合功率分流液压混合动力系统控制策略 | 机床与液压 | 2013,41(3),48-51 | 国内期刊 | 仝猛，赵慧，Monika IVANTYSYNOVA |
| 342 | 静电喷雾轴对称锥射流模型及其数值模拟 | 农业机械学报 | 2013,44(8),84-89 | 国内期刊 | 汪朝晖，蒋圣伟，高全杰 |
| 343 | 新型气液混合喷油刀梁设计及数值模拟 | 排灌机械工程学报 | 2013,31(3),236-241 | 国内期刊 | 汪朝晖，高全杰，徐占民，王维 |
| 344 | 20辊森吉米尔轧机轧制过程中的辊系受力分析 | 华中科技大学学报（自然科学版） | 2013,41(2),17-21 | 国内期刊 | 汪朝晖，严育才，张耀兵，严超 |
| 345 | 基于压电主动传感方式的螺栓松动检测实验研究 | 传感技术学报 | 2013,3(7),1059-1063 | 国内期刊 | 罗毅，王涛，刘绍鹏，肖涵，王志刚，李友荣 |
| 346 | 基于小波变换的镁碳质耐火材料受压损伤声发射特征分析 | 材料导报 | 2013,27(16),139-142 | 国内期刊 | 黄金波，王志刚，刘昌明 |
| 347 | 基于声发射信号参数分析的耐火材料损伤聚类研究 | 材料导报 | 2013,27(18),153-156 | 国内期刊 | 肖兴亮，王志刚，刘昌明 |
| 348 | 基于ABAQUS的耐火材料细观损伤本构模型的GUI二次开发 | 中国科技论文在线 | 2013 | 国内期刊 | 周畅，王志刚，刘昌明 |
| 349 | 考虑翼缘横向弯曲的波纹腹板梁弯曲特性研究 | 机械科学与技术 | 2013,32(4),607-611,615 | 国内期刊 | 魏国前，饶刚，余震 |
| 350 | 起重机波纹腹板主梁结构的可行性研究 | 现代制造工程 | 2013,(2),140-143 | 国内期刊 | 魏国前，饶刚，范勤 |
| 351 | 曲线的三参数路径规划车削插补算法研究 | 机电工程 | 2013,30(9),1033-1037 | 国内期刊 | 余震，易磊，唐秋华，李明，曹俊 |
| 352 | 基于剩余使用寿命评估的再制造方案决策模型及应用 | 机械工程学报 | 2013,49(7),51-57 | 国内期刊 | 张旭刚，张华，江志刚 |
| 353 | 基于CBR技术与BP神经网络的产品成本估算 | 现代制造工程 | 2014,(3),27-30 | 国内期刊 | 周敏，张力，蒋国璋，江志刚 |
| 354 | 基于CBR和RBR的再制造零件修复工艺智能决策系统 | 制造技术与机床 | 2014,(1),111-117 | 国内期刊 | 周敏，任勇，张华，江志刚 |
| 355 | 基于Assur机构构成模式的非零开式运动链的构型 | 机械传动 | 2013,(2) | 国内期刊 | 李佳，孔建益，廖汉元，侯宇 |
| 356 | 操作时间不确定时第一类多产品混合装配的鲁棒平衡 | 武汉科技大学学报 | 2013,36(1),69-73 | 国内期刊 | 李平，唐秋华，夏绪辉，C.A.Floudas |
| 357 | 基于双层遗传编码的柔性作业车间自适应重调度研究 | 中国机械工程 | 2013,24(16),2195-2201 | 国内期刊 | 李平，唐秋华，夏绪辉，陈平和 |
| 358 | [基于元胞自动机的第II类装配线平衡问题求解 | 中国机械工程 | 2013,24(5),654-657 | 国内期刊 | 鲁素丽，唐秋华，李明 |
| 359 | 融合约束满足和遗传优化的炼钢连铸生产调度 | 计算机集成制造系统 | 2013,19(11),2834-2846 | 国内期刊 | 陈立，唐秋华，陈伟明，Floudas.C.A，李明 |
| 360 | 基于单元特定事件的多缓冲炼钢连铸生产调度建模 | 武汉科技大学学报 | 2013,36(2),104-107 | 国内期刊 | 叶云，唐秋华，易磊，陈立，李明 |
| 361 | 一种新型液压油箱的优化设计 | 液压与气动 | 2013,(4),86-88 | 国内期刊 | 苏杰，傅连东，湛从昌，涂威 |
| 362 | 某厂开卷机液压系统改造 | 液压与气动 | 2013,(2),96-98 | 国内期刊 | 涂威，傅连东，颜俊，苏杰 |
| 363 | 基于知识的废旧机床再制造设计方法研究 | 制造技术与机床 | 2014,12,49-54 | 国内期刊 | 周帆, 江志刚, 张华, 张楚锋, 张旭刚 |
| 364 | 应用 ABAQUS 的液压挖掘机动臂有限元分析 | 现代制造工程 | 2014,(07),109-113 | 国内期刊 | 蒋小利, 江志刚, 张华, 胡晓莉 |
| 365 | 圆盘剪切力与带钢的振动研究 | 机械设计与制造 | 2014,(07),142-144 | 国内期刊 | 李存远, 杨金堂, 张俊, 黄斌 |
| 366 | 基于ANSYS的减速机齿轮有限元分析 | 武汉科技大学学报 | 2014,37(04),288-291 | 国内期刊 | 杨金堂, 张珂, 全芳成, 许海 |
| 367 | 变截面吊车梁静动态特性的有限元分析 | 机械设计与制造 | 2014,(04),44-46 | 国内期刊 | 孟丹, 杨金堂, 黄新豪, 谈大伟 |
| 368 | 基于综合评价的焊接资源环境属性分析 | 电焊机 | 2014,44(03),126-129 | 国内期刊 | 谢玉婷, 张华, 鄢威 |
| 369 | 基于支持向量机数控机床切削能耗预测方法研究 | 机械设计与制造 | 2014,(11),54-56 | 国内期刊 | 陈薇薇, 张华, 向琴, 张业祥 |
| 370 | 多针电极喷雾刀梁静电场特性与雾化效果研究 | 农业机械学报 | 2014,45(04),110-116 | 国内期刊 | 高全杰, 夏志勇, 汪朝晖, 王维, 秦拓,黄浩 |
| 371 | 电液压脉冲气溶性射流动力特性及其破岩规律研究 | 煤矿机械 | 2014,35(04),64-67 | 国内期刊 | 高全杰, 夏志勇, 汪朝晖, 廖振方 |
| 372 | 自激振荡脉冲射流雾化的机理分析 | 机械设计与制造 | 2014,(04),212-214 | 国内期刊 | 高全杰, 王维, 汪朝晖, 夏志勇 |
| 373 | 基于时间反演法的螺栓健康监测研究 | 科学技术与工程 | 2014,14(19),20-24. | 国内期刊 | 王涛, 李桥, 邵俊华, 刘绍鹏, 李友荣 |
| 374 | 基于压电阻抗技术的螺栓松动检测试验研究 | 传感技术学报 | 2014,27(10),1321-1325 | 国内期刊 | 王涛, 杨志武, 邵俊华, 李友荣 |
| 375 | 特征线坐标系下柱对称超音速流膨胀波计算方法研究 | 武汉科技大学学报 | 2014,37(04),292-296. | 国内期刊 | 郭良斌, 赵瑞兵 |
| 376 | 内点法优化案例中FR共轭梯度法方向固化现象 | 中国冶金教育 | 2014,(04),31-34 | 国内期刊 | 郭良斌, 肖涵 |
| 377 | 基于细观力学的耐火材料单轴拉伸微损伤模型研究 | 耐火材料 | 2014,48(05),352-355. | 国内期刊 | 杨康, 王志刚, 刘昌明 |
| 378 | 基于细观损伤力学的耐火材料单轴压缩非线性力学行为研究 | 工程力学 | 2014,31(07),199-202 | 国内期刊 | 杨康, 王志刚, 刘昌明 |
| 379 |
基于界面相模型的耐火材料非线性力学行为模拟
| 材料科学与工程学报 | 2014,32(02),268-271 | 国内期刊 | 钟诚, 王志刚, 刘昌明 |
| 380 | 基于主成分分析和高斯混合模型的耐火材料损伤信号分类 | 武汉科技大学学报 | 2014,37(04),269-272+281. | 国内期刊 | 周海涛, 王志刚, 刘昌明 |
| 381 | 基于Yamada 模型的压电复合材料吸声性能的研究 | 传感技术学报 | 2014,27(04),452-455 | 国内期刊 | 杨丹, 王涛, 肖涵, 赵三星 |
| 382 | 地下卷取机入口槽型板有限元分析 | 冶金设备 | 2014,(01),28-31 | 国内期刊 | 杨丹, 肖涵, 王涛, 赵三星 |
| 383 | 基于有限元的滑块式万向联轴器系统优化设计 | 机械科学与技术 | 2014,33(04),555-558 | 国内期刊 | 郝志强,李友荣, 鲁光涛 |
| 384 | LMD形态学与EEMD形态学在故障诊断中的对比研究 | 仪表技术与传感器 | 2014(08),107-110 | 国内期刊 | 侯高雁, 吕勇, 李友荣, 王志刚 |
| 385 | 基于EEMD与形态滤波的滚动轴承故障诊断方法研究 | 武汉科技大学学报（自然科学版） | 2014,37(05),382-386 | 国内期刊 | 黄浩, 吕勇, 肖涵, 袁锐 |
| 386 | 全自动压铸件生产系统工作站仿真 | 特种铸造及有色合金 | 2014,34(09),948-950 | 国内期刊 | 孙璟, 刘传胜, 蒋国璋 |
| 387 | 废旧零部件剩余使用寿命评估方法研究 | 机床与液压 | 2014,42(11),172-176 | 国内期刊 | 张旭刚, 张华, 江志刚 |
| 388 | 面向主动回收的汽车产品模块化设计研究 | 物流技术 | 2014,33(05),148-150 | 国内期刊 | 权妮, 夏绪辉 |
| 389 | 连铸机结晶器液压振动装置结构应力动态响应分析 | 机械设计与制造 | 2014,(10),194-196+199 | 国内期刊 | 夏绪辉, 权妮, 乔沙林, 罗欣 |
| 390 | 桥式起重机主梁端部优化方法研究 | 机械设计与制造 | 2014,(03),107-109+113 | 国内期刊 | 张正本, 唐秋华, 魏国前 |
| 391 | 玻璃钢化冷却过程的建模与仿真 | 机械设计与制造 | 2014(12),152-154+158 | 国内期刊 | 唐秋华, 吴再豪, 余震, 方毅 |
| 392 | 与输出变量相关的非线性三阶系统运动行为 | 科学技术与工程 | 2014,14(16),55-61 | 国内期刊 | 金晓宏, 李杰杰, 刘文浩, 程方明 |
| 393 | 含有负弹性刚度负载的电液控制策略探讨 | 科学技术与工程 | 2014,14(20),39-44 | 国内期刊 | 程方明, 金晓宏, 艾亚辉 |
| 394 | 基于局域均值分解的轧制力响应频率提取 | 武汉科技大学学报 | 2014,37(04),282-287+304 | 国内期刊 | 金晓宏, 樊捷 |
| 395 | 水压蛇形灭火机器人中水压自伺服摆动缸运动特性的研究 | 液压与气动 | 2014,(08,26-31 | 国内期刊 | 梅鹏, 蒋林, 赵慧, 晏晚君, 胡金, 邹竞刚, 吴若麟 |
| 396 | 水压蛇形灭火机器人中部关节解耦特性研究 | 制造业自动化 | 2014,36(24),123-128 | 国内期刊 | 吴若麟, 蒋林 |
| 397 | 不同结构均压槽间隙流场特性分析 | 液压与气动 | 2014,(07),73-75+87 | 国内期刊 | 罗文, 傅连东, 苏杰 |
| 398 | 基于SolidWorks的AGC液压缸参数化设计 | 武汉科技大学学报 | 2014,37(04),297-299+304 | 国内期刊 | 施敏, 陈新元, 湛从昌, 鲁腊福, 黄智武, 左林 |
| 399 | 泵车臂架随动控制研究及其联合仿真 | 系统仿真学报 | 2014,26(11),2791-2796+2802 | 国内期刊 | 黄大伟, 陈新元, 张俊峰, 李康, 刘白雁, 曾镛 |
| 400 | 混匀取料机料耙液压传动系统的优化 | 机床与液压 | 2014,42(04),29-31 | 国内期刊 | 李涛, 陈新元, 邓江洪 |
| 401 | 电阻应变计在轧机伺服液压缸测试中的应用 | 机床与液压 | 2014,42(05),60-62 | 国内期刊 | 尹丹, 陈新元, 邓江洪, 李鹏, 李涛 |
| 402 | 混凝土泵车末端软管运动趋势检测系统的设计 | 制造业自动化 | 2014,36(10),143-145 | 国内期刊 | 余金华, 陈新元 |
| 403 | 基于Fluent的液压阀芯均压槽的流场仿真 | 液压与气动 | 2014,(01),35-37 | 国内期刊 | 牛晓阳, 陈奎生, 湛从昌 |
| 404 | K型井架有限元仿真分析及检测方案优化 | 石油机械 | 2014,42(01),14-17 | 国内期刊 | 许仁波, 段晶晶, 邓荆江, 王鑫, 王希军, 张建荣 |
| 405 | 大行程纳米级两级驱动三维精密位移系统的设计 | 仪表技术与传感器 | 2014,(07),1-4+8 | 国内期刊 | 邓小雯, 但斌斌, 陈育荣, 王生怀 |
| 406 | 叶片式摆动液压油缸盖板静态密封设计 | 润滑与密封 | 2014,39(11),78-80 | 国内期刊 | 谢良喜, 田志翔, 钱文强, 陈少华, 李露 |
| 407 | 挖掘机多体系统有限元分析与疲劳寿命预测 | 矿山机械 | 2014,42(07),51-54 | 国内期刊 | 谢良喜, 让勇, 赵刚 |
| 408 | 含钒页岩焙烧用回转窑温度场数值模拟研究 | 计算机仿真 | 2014,31(02),320-324 | 国内期刊 | 邹光明, 杨威, 李萍, 王兴东 |
| 409 | 垫圈簧片的CAE分析与注塑模设计 | 制造业自动化 | 2014,36(10),104-106 | 国内期刊 | 邹光明, 张宝祥, 丁博, 邓如应, 王兴东 |
| 410 | 含钒页岩焙烧用回转窑热应力分布的研究 | 铸造技术 | 2014,35(07),1553-1555 | 国内期刊 | 邹光明, 杨威, 李萍, 王兴东, 孔建益 |
| 411 | 合金化炉冷却段流场和温度场的数值仿真研究 | 计算机仿真 | 2014,31(07),208-211 | 国内期刊 | 李萍,邹光明, 杨威, 王兴东 |
| 412 | 垫圈簧片成型注塑模具的浇口布置研究 | 机械工程师 | 2014,(06),114-116 | 国内期刊 | 邹光明, 丁博, 邓如应, 王兴东 |
| 413 | 动态Job Shop调度仿真中的交货期设置问题研究 | 制造业自动化 | 2014,36(08),66-68 | 国内期刊 | 范华丽, 熊禾根, 蒋国璋, 李公法 |
| 414 | 复杂光照环境下的线材缺陷自适应分割方法 | 光电工程 | 2014,41(02),40-46 | 国内期刊 | 张槐祥, 刘怀广, 杨茂麟, 王兴东 |
| 415 | 超高压合成 TiC-NiTi 复合材料的制备与工艺参数预测 | 热加工工艺 | 2014,43(16),128-136 | 国内期刊 | 毛阳, 涂福泉, 许仁波 |
| 416 | 溜井扫描探头变频调速的实现 | 矿山机械 | 2014,42(02),112-115 | 国内期刊 | 涂福泉, 刘小双, 张安裕, 陈奎生 |
| 417 | 桥式起重机金属结构检测及安全评估研究 | 制造业自动化 | 2014,36(15),55-60 | 国内期刊 | 舒文杰, 徐桂芳, 魏国前, 范勤 |
| 418 | SVM的起重机金属结构安全评估研究 | 机械设计与制造 | 2014,(12),269-272 | 国内期刊 | 舒文杰, 徐桂芳, 魏国前, 范勤 |
| 419 | 三重分筛式半夏收获机的设计 | 农机化研究 | 2015,(12),130-134 | 国内期刊 | 张璋, 赵刚, 江亚 |
| 420 | 基于价值分析的废旧产品再制造决策模型研究及应用 | 现代制造工程 | 2015,(9),145-148 | 国内期刊 | 周婷婷, 江志刚, 张华, 朱硕 |
| 421 | 高效智能半夏清洗脱皮装置设计 | 农机化研究 | 2015,(12),135-139 | 国内期刊 | 江亚，江志刚，张璋 |
| 422 | 面向节能优化的数控铣削参数优化方法研究 | 机械设计与制造 | 2015,(8),110-113 | 国内期刊 | 胡狄, 张华, 鄢威, 李弼心 |
| 423 | 一种面向能量优化的毛坯尺寸选择方法 | 机械设计与研究 | 2015,(5),93-96 | 国内期刊 | 肖永茂, 张华, 江志刚 |
| 424 | 混凝土泵车再制造性评价与信息管理支持系统的设计及应用 | 现代制造工程 | 2015,(8),35-41 | 国内期刊 | 张辉. 张华, 向琴, 邓洪, 胡晓莉 |
| 425 | 数控铣削加工中心主传动系统服役过程能效计算模型 | 机床与液压 | 2015,(3),112-115 | 国内期刊 | 马峰, 张华, 鄢威 |
| 426 | 数控机床能耗单元能耗成分分析数学模型 | 机床与液压 | 2015,43(11),140-144 | 国内期刊 | 马峰, 张华, 鄢威 |
| 427 | 板件垛搬运机构方案设计与优化 | 林产工业 | 2015,42(4),31-34 | 国内期刊 | 谢良喜, 崔广宇, 田志翔, 万晓红 |
| 428 | 第二类双边装配线平衡的混合粒子群算法 | 机械设计与制造 | 2015(1),113-116 | 国内期刊 | 李梓响, 唐秋华, 林斌, 张利平 |
| 429 | 融合学习效应和加强约束的混合模型U型装配线平衡 | 机械科学与技术 | 2015,34(1),69-74 | 国内期刊 | 唐秋华, 林斌, 张利平, 陈平和 |
| 430 | 汽车喷漆批次重组建模与优化 | 机械设计与制造 | 2015,(4),181-184 | 国内期刊 | 唐秋华, 李苑, 林斌 , 于沛远 |
| 431 | 面向汽车投产排序的混合多目标网格遗传算法 | 中国机械工程 | 2015,26(16),2170-2178 | 国内期刊 | 唐秋华, 胡进, 张利平, 操小军 |
| 432 |
C6132A1机床再制造实践
| 制造技术与机床 | 2015,(12),36-40 | 国内期刊 | 张旭刚, 孔勇, 江志刚, 李鑫, 张楚锋 |
| 433 | 4000吨级海洋科学考察船尾滚筒结构设计研究 | 航舰科学技术 | 2015,(6),16-20 | 国内期刊 | 冯勋,夏绪辉, 李永平, 容芷君 |
| 434 | 2t/8.7m壁行式起重机动态特性仿真分析 | 机械设计与制造 | 2015,(10),94-97 | 国内期刊 | 何飞, 夏绪辉, 钱文强, 向红 |
| 435 | 基于模糊物元法的废旧产品预处理中心选址决策 | 物流技术 | 2015,(17),143-146 | 国内期刊 | 向红, 夏绪辉, 江志刚 |
| 436 | 600kWl2V发动机曲轴轴系振动固有特性仿真分析 | 现代制造工程 | 2015,(1),70-73 | 国内期刊 | 罗欣, 夏绪辉, 乔沙林, 严运兵 |
| 437 | 连铸结晶器加渣机布料区域矩形化补偿机构设计 | 工程设计学报 | 2015,(5),420-424 | 国内期刊 | 束智伟, 陈新元, 邓江洪, 詹小辉 |
| 438 | 轧机伺服液压缸测试系统中活塞位移的应变转换方法研究 | 制造业自动化 | 2015,(10),1-3 | 国内期刊 | 杨钦翔, 陈新元, 丁先山 |
| 439 | 大跨度多自由度机构的非完全相似试验模型设计方法 | 制造业自动化 | 2015,37(22),104-107 | 国内期刊 | 郭凯, 陈新元, 李勇, 张俊峰, 杨海清 |
| 440 | 泵车布料软管姿态检测传感器研制 | 仪表技术与传感器 | 2015,(12),1-3 | 国内期刊 | 余峰, 陈新元, 李勇, 张俊峰, 杨海清 |
| 441 | 基于模式识别的混凝土泵车臂架壁厚优化 | 机床与液压 | 2015,43(5),134-137 | 国内期刊 | 戴登政, 赵慧 |
| 442 | 一种基于梯度直方图的焊缝边缘检测方法 | 电焊机 | 2015,45(4),50-53 | 国内期刊 | 胡金, 赵慧, 蒋林 |
| 443 | 液压混合动力车辆能量回收系统建模与仿真 | 机床与液压 | 2015,43(4),107-109 | 国内期刊 | 郑洁, 赵慧, 仝猛 |
| 444 | 分数阶PIλDμ控制器数字实现与参数优化 | 制造业自动化 | 2015,(4),9-11 | 国内期刊 | 郑翠, 赵慧, 蒋林, 李苑 |
| 445 | 暂冲气源容器压力变化与管道非定常流动计算 | 机械设计与制造 | 2015,(11),67-70 | 国内期刊 | 赵运翔, 郭良斌 |
| 446 | 基于热点应力法的板坯横移车疲劳评定研究 | 制造业自动化 | 2015,(1),47-50 | 国内期刊 | 董亚飞, 魏国前 |
| 447 | YKR 型振动筛筛体运动及物料透筛概率分析 | 武汉科技大学学报 | 2015,38(5),368-372 | 国内期刊 | 杨淑琳, 赵三星 |
| 448 | 基于遗传算法的汽车驱动轴多目标轻量化优化设计 | 机械设计与制造 | 2015,(3),87-90 | 国内期刊 | 朱发渊, 汪朝晖, 吕密 |
| 449 | 基于改进直接灰色模型的泵车摆缸泄漏预测 | 武汉科技大学学报 | 2015,38(6),459-462 | 国内期刊 | 徐增丙, 李友荣, 王志刚, 刘昌明, 周承凯 |
| 450 | 齿轮振动信号滑动递归分析及其应用 | 机械传动 | 2015,(3) | 国内期刊 | 肖涵,吕勇 |
| 451 | 基于多重分形理论与神经网络的齿轮故障诊断 | 振动与冲击 | 2015,34(21),15-18 | 国内期刊 | 褚青青, 肖涵,吕勇, 杨志武 |
| 452 | 基于PCA和5LMD分解的滚动轴承故障特征提取方法 | 仪表技术与传感器 | 2015,(4),76-78 | 国内期刊 | 黄浩, 吕勇, 肖涵, 侯高雁 |
| 453 | 非局部均值去噪和LMD综合的滚动轴承故障诊断 | 机床与液压 | 2015,43(13),172-176 | 国内期刊 | 祝青林, 吕勇, 李宁 |
| 454 | 广义形态差值滤波器的构造及其在轴承故障中的应用 | 机械设计与制造 | 2015,(6),25-29 | 国内期刊 | 王龙胜, 吕勇, 肖涵 |
| 455 | 基于变模式分解降噪的滚动轴承故障诊断研究 | 机械设计与制造 | 2015,(10),21-25 | 国内期刊 | 刘江, 吕勇 |
| 456 | 基于压电阻抗技术的智能螺栓的研究 | 机械设计与制造 | 2015,(9),56-60 | 国内期刊 | 王涛, 杨志武, 邵俊华, 李友荣 |
| 457 | 基于压电时间反演法的螺栓松动检测研究 | 传感技术学报 | 2015,(12),1795-1799 | 国内期刊 | 王涛, 刘绍鹏, 李川, 刘佳来, 杨丹, 李友荣 |
| 458 | 一个三阶非线性系统混沌探讨及其混沌消除 | 制造业自动化 | 2015,(15),96-98 | 国内期刊 | 金晓宏, 肖鹏飞, 杨莹莹 |
| 459 | 伺服阀滑阀阀口系数影响因素分析 | 武汉科技大学学报：自然科学版 | 2015,38(3),179-182 | 国内期刊 | 金晓宏, 艾亚辉, 黄浩, 杨科 |
| 460 | 连续旋转液压伺服关节性能分析 | 武汉科技大学学报：自然科学版 | 2015,38(4),272-278 | 国内期刊 | 金晓宏, 郑开柳, 蒋林 |
| 461 | 弹性负载电液发生器的稳定性分析 | 机床与液压 | 2015,43(5),13-16 | 国内期刊 | 邓洋, 金晓宏, 黄浩 |
| 462 | 一个比Rossler 系统代数结构更为简单的三阶混沌系统及其混沌抑制 | 科学技术与工程 | 2015,15(18),1-5 | 国内期刊 | 金晓宏, 刘文浩, 黄浩 |
| 463 | 连续旋转液压伺服关节整体模态分析及关键部件静力学分析 | 武汉科技大学学报：自然科学版 | 2015,38(5),365-367 | 国内期刊 | 金晓宏, 杨莹莹, 郑开柳, 蒋林 |
| 464 | 闭式变液面液压油箱吸油的设计与研究 | 科技创新导报 | 2015,(25),5-7 | 国内期刊 | 杨超, 金晓宏 |
| 465 | 武钢CSP线夹送辊缠钢机理分析与改进措施 | 轧钢 | 2015,32(5),24-27 | 国内期刊 | 陆长胜, 夏绪辉, 陶桂林, 李文晓 |
| 466 | 新型钢包的温度场及其影响因素模拟分析 | 武汉科技大学学报 | 2015,38(6),401-407 | 国内期刊 | 李公法, 刘泽, 孔建益, 蒋国璋, 常文俊, 李贝, 李辉 |
| 467 | 工序松弛规则及其在动态Job Shop调度问题中的应用仿真研究 | 制造业自动化 | 2015,(6),61-64 | 国内期刊 | 范华丽, 熊禾根, 钱国洁, 蒋国璋, 李公法 |
| 468 | 动态车间调度问题调度规则算法仿真试验的样本容量确定方法 | 制造业自动化 | 2015,(8),41-43 | 国内期刊 | 熊禾根, 钱国洁, 范华丽, 蒋国璋 |
| 469 | MAS小波的钢板表面缺陷边缘检测的研究. | 机械设计与制造 | 2015,5,43-46 | 国内期刊 | 吴彬彬, 汤勃, 孔建益, 王兴东 |
| 470 | 三辊减径机架有限元分析与结构改进研究 | 机械设计与制造 | 2015,(3),117-120 | 国内期刊 | 周伟鹏, 邹光明, 王兴东, 孔建益 |
| 471 | 反求工程在液力变矩器叶轮建模中的应用研究 | 机械设计与制造 | 2015,(7),160-163 | 国内期刊 | 徐蓓, 邹光明, 王兴东, |
| 472 | 含钒页岩焙烧用回转窑结构优化数值模拟研究 | 机械设计 | 2015,(7),101-104 | 国内期刊 | 杨威, 邹光明, 李萍, 王兴东, 孔建益 |
| 473 | 扇形雾化喷嘴的射流传热实验研究 | 机床与液压 | 2015,43(15),121-125 | 国内期刊 | 熊建敏, 邹光明, 李萍, 王兴东, 孔建益 |
| 474 | 基于Pro/E、ADAMS与ANSYS的小车底板运动特性仿真分析 | 制造业自动化 | 2015,(1),58-60 | 国内期刊 | 肖潇, 杨金堂, 全芳成, 李京 |
| 475 | 基于有限元的转炉煤气风机叶轮静动态特性分析 | 武汉科技大学学报 | 2015,38(4),290-293 | 国内期刊 | 杨金堂, 曾璐, 肖潇, 全芳成 |
| 476 | 智能阀门定位器控制方法的研究 | 机床与液压 | 2015,(2),141-144 | 国内期刊 | 赵明南, 杨金堂, 夏中愈, 张俊, 全芳成 |
| 477 | 平粮机器人结构设计及运动仿真 | 农机化研究 | 2015,(12),78-86 | 国内期刊 | 蒋林, 金祖飞, 刘晓磊, 晏晚君, 叶维林, 蔡军, 张新友 |
| 478 | 基于遗传改进人工势场法的全区域平粮机器人路径规划
| 中国农机化学报 | 2015,36(5),220-226 | 国内期刊 | 蒋林, 刘晓磊, 赵慧, 晏晚君, 叶维林, 蔡军 |
| 479 | 三自由度解耦液压自伺服关节运动特性分析 | 机械设计与制造 | 2015,(9),146-151 | 国内期刊 | 吴若麟, 蒋林, 赵慧, 吴文超 |
| 480 | 基于遗传算法的液压自伺服摆动缸结构优化与动态特性分析 | 机床与液压 | 2015,43(19),9-15 | 国内期刊 | 吴若麟, 蒋林, 邹竞刚, 肖俊, 刘晓磊 |
| 481 | 可重构液压自伺服机器人关节D-H参数库建立与运动学分析 | 机床与液压 | 2015,43(21),1-7 | 国内期刊 | 吴若麟, 蒋林, 张宏伟, 刘晓磊, 肖俊 |
| 482 | 摩擦系数对45°螺旋输送机中颗粒速度的影响研究 | 煤炭技术 | 2015,34(12),210-212 | 国内期刊 | 贾宏禹,孔建益,周思柱, 吴帮雄, 贾宏伟, 吕志鹏 |
| 483 | 复杂条件下多智能体系统编队一致性控制 | 武汉科技大学学报 | 2015,38(5),373-376 | 国内期刊 | 徐敏敏, 金晓宏, 雷斌, 陈浩 |
| 484 | 浅谈控制理论教学中的传道与授业 | 高教学刊 | 2015,(9),18-19 | 国内期刊 | 刘白雁, 蒋林, 陈新元 |
| 485 | 人工牵引下泵车自动浇筑的臂架移动轨迹的优化 | 机械科学与技术 | 2015,34(9),1345-1349 | 国内期刊 | 黄大伟, 刘白雁, 陈新元, 曾镛, 张如伟 |
| 486 | 基于图像金字塔的钢板表面深度信息提取方法 | 计量学报 | 2015,(4) | 国内期刊 | 刘源泂, 孔建益, 徐福军, 黄前德, 王兴东 |
| 487 | 高炉开风口机的设计及性能优化 | 机械设计与制造 | 2015,(9),193-196 | 国内期刊 | 何涛, 王兴东, 赵思, 陈胜香 |
| 488 | 加热炉炉辊温度场数值模拟及结构改进研究 | 机械设计与制造 | 2015,(9),236-239 | 国内期刊 | 杨科, 王兴东, 欧阳德刚, 罗巍 |
| 489 | 导热油加热热辊压机轧辊加温过程、温度-应力耦合分析及试验研究 | 机械设计与制造 | 2015,(9),143-145 | 国内期刊 | 肖述文, 王兴东, 周三春, 游华军 |
| 490 | 基于图像灰度自适应控制的光源系统 | 电子器件 | 2015,(2),269-273 | 国内期刊 | 刘秀峰, 王兴东, 裴云, 杨先发, 刘源泂 |
| 491 | 耐火材料声发射源信号的盲反卷恢复 | 机械设计与制造 | 2015,(6),91-94 | 国内期刊 | 雷哲, 王志刚, 刘昌明, 王涛 |
| 492 | RBPF 在耐火材料声发射源信号恢复中的应用 | 机械设计与制造 | 2015,(9),45-48 | 国内期刊 | 孙晓明, 王志刚, 刘昌明 |
| 493 | 基于压电主动传感的耐火材料声发射源信号恢复 | 机械设计与制造 | 2015,(9),65-68 | 国内期刊 | 雷哲, 王志刚, 刘昌明, 王涛 |
| 494 | 基于 EMD 和多重分形谱参数的耐火材料损伤模式识别
| 武汉科技大学学报, 自然科学版 | 2015,38(4),263-267 | 国内期刊 | 苏涛, 王志刚, 刘昌明, 徐增丙, 但斌斌 |
| 495 | 带钢卷取过程的有限元动态仿真 | 热加工工艺 | 2015,(3),174-177 | 国内期刊 | 熊得斌, 王志刚, 张堂正, 吴少斌 |
| 496 | 基于LabVIEW的高铁路基测试系统的自适应控制仿真 | 机床与液压 | 2015,(1),123-126 | 国内期刊 | 宋佳, 曾良才, 万园, 郑飞龙, 曾子敬, 开岗生 |
| 497 | 基于 Fluent 的钻井纠斜液压系统导向套叶片形状优化选择 | 武汉科技大学学报（自然科学版） | 2015,38(4),279-281 | 国内期刊 | 陈卓, 曾良才, 湛从昌, 郑飞龙, 赵康 |
| 498 | 基于Workbench的AGC伺服液压缸结构优化设计 | 制造业自动化 | 2015,(5),102-103 | 国内期刊 | 赵康, 傅连东, 刘良, 湛从昌 |
| 499 | 混凝土泵车摆动系统的动态特性研究 | 机械设计与制造 | 2015,(11),163-166 | 国内期刊 | 靖保平, 傅连东, 邓江洪, 赵康 |
| 500 | 阀前压力脉动的仿真与实验研究 | 机床与液压 | 2015,(1),68-73 | 国内期刊 | 金鑫, 傅连东, 阮长松 |
| 501 | 变间隙密封液压缸活塞临界载荷计算与防过载策略 | 制造业自动化 | 2015,37(18),83-85 | 国内期刊 | 陈亮, 傅连东, 梅波, 湛从昌 |
| 502 | 间隙密封液压缸的UDF有限元分析 | 机床与液压 | 2015,(3),179-181 | 国内期刊 | 周文驰, 傅连东, 苏杰 |
| 503 |
基于阈值分类的色调映射方法选择
| 西安邮电大学学报 | 2015,20(6),1-4 | 国内期刊 | 伍世虔, 张凤, 刘颖, 刘卫华 |
| 504 | 基于光电效应的裸眼3D显示技术探究 | 科技创新与应用 | 2015,(32) | 国内期刊 | 杨超, 伍世虔, 戴千 |
| 505 | 无轨钢包车回转支撑的寿命与承载能力分析计算 | 煤矿机械 | 2015,36(12),50-52 | 国内期刊 | 程良, 但斌斌, 容芷君, 胡迪, 王瑞 |
| 506 | 间隙密封液压缸摩擦力分析 | 机床与液压 | 2015,43(19),91-94 | 国内期刊 | 蒋俊, 曾良才, 湛从昌, 付曙光 |
| 507 | 基于光纤Bragg光栅的机器人力/力矩触觉传感技术研究进展 | 激光与光电子学进展 | 2016,(5),55-66 | 国内期刊 | 郭永兴, 孔建益, 熊禾根, 李公法, 刘洪海 |
| 508 | 基于工艺参数响应曲面的干式铣削机床能效分析 | 中国机械工程 | 2016,27(21),2944-2948 | 国内期刊 | 赵刚, 王强, 阮丹, 张学豪 |
| 509 | 带导轨的磁棒链式冷却液过滤器的设计 | 煤矿机械 | 2016,37(1),10-12 | 国内期刊 | 方成, 赵刚, 章翔 |
| 510 | 液压挖掘机工作装置有限元分析 | 现代制造工程 | 2016,(2),89-93 | 国内期刊 | 张业祥, 赵刚, 章翔, 秦威 |
| 511 | 基于频率跟踪法的螺栓联接状态监测研究 | 科学技术与工程 | 2016(3),157-161 | 国内期刊 | 王涛, 李川,刘绍鹏, 李友荣 |
| 512 | 螺栓联接界面表面分形及接触研究 | 机械设计与制造 | 2016(5),107-110 | 国内期刊 | 刘绍鹏, 王涛,李友荣, 李川 |
| 513 | 压电阻抗技术用于智能螺栓的实验研究 | 机械设计与制造 | 2015(9),56-60 | 国内期刊 | 王涛, 杨志武,邵俊华, 李友荣 |
| 514 | 基于ART和Yu范数的聚类方法在齿轮故障诊断中的应用 | 武汉科技大学学报 | 2016,39(2),116-120 | 国内期刊 | 徐增丙, 李友荣, 王志刚, 轩建平 |
| 515 | 基于混合fuzzy ARTMAP智能诊断方法在油缸泄漏诊断中的应用 | 中国科技论文 | 2016,11(10),1089-1093 | 国内期刊 | 徐增丙, 李友荣, 王志刚, 轩建平 |
| 516 | 100t铁水罐热-结构耦合分析与实测验证 | 武汉科技大学学报：自然科学版 | 2016,39(3),204-208 | 国内期刊 | 但斌斌, 曹亮, 肖林伟, 姜本熹,吴瑞 |
| 517 | 基于ADAMS的液压挖掘机工作装置机构运动仿真与分析
| 现代制造工程 | 2015,(8),87-90 | 国内期刊 | 但斌斌, 沈洋,张华, 容芷君 |
| 518 | 无轨钢包车回转支承的寿命与承载能力分析计算 | 煤矿机械 | 2015,36(12),50-52 | 国内期刊 | 程良, 但斌斌,容芷君, 胡迪,王瑞 |
| 519 | 基于不同接触中心的斜齿轮应力有限元分析 | 长江大学学报(自科版) | 2016,13(13),44-47 | 国内期刊 | 杨丹, 黄青，孙笑, 任雪芹 |
| 520 | 新型钢包的应力场及其影响因素模拟分析 | 武汉科技大学学报 | 2016,39(1),19-23 | 国内期刊 | 李公法, 李喆,孔建益, 蒋国璋, 常文俊 |
| 521 | 基于FBG倾角传感器的分布式测斜技术及其在边坡抗滑桩中的应用研究 | 武汉科技大学学报 | 2016,39(6),450-454 | 国内期刊 | 李贝, 张大伟, 李公法, 郭永兴, 孙瑛 |
| 522 | 基于支持向量机的机电产品再制造成本预测方法 | 机械设计与制造 | 2016,(4),268-272 | 国内期刊 | 向红, 夏绪辉,王蕾, 江志刚 |
| 523 | 钢铁工业逆向供应链服务模块化方法 | 武汉科技大学学报（自然科学版） | 2016,39(1),41-47 | 国内期刊 | 熊颖清, 夏绪辉, 王蕾, 向红 |
| 524 | 求解随机型双边装配线平衡问题的混合回溯搜索优化算法 | 武汉科技大学学报 | 2016,39(2),121-127 | 国内期刊 | 吴意, 唐秋华, 张利平, 何晓霞 |
| 525 | 求解非线性P0 互补问题的填充函数法 | 武汉科技大学学报 | 2016,39(3),236-240 | 国内期刊 | 袁柳洋, 唐秋华, 贾世会 |
| 526 | 基于拉格朗日下界求解的炼钢-连铸生产调度方法 | 武汉科技大学学报 | 2016,39(5),353-360 | 国内期刊 | 韩大勇, 唐秋华, 张利平, 张启敏 |
| 527 | CSP生产模式下轧制计划编制模型及算法 | 武汉科技大学学报 | 2016,39(1),24-29 | 国内期刊 | 张启敏, 唐秋华, 郑鹏, 毛永年, 王春锋 |
| 528 | 多行车同轨运行的作业避碰及调度优化 | 现代制造工程 | 2016,(5),99-104 | 国内期刊 | 毛永年, 唐秋华, 张利平, 张启敏 |
| 529 | 钢厂多行车作业调度方法研究 | 机械设计与制造 | 2016,(11),66-70 | 国内期刊 | 张启敏, 唐秋华, 毛永年, 王春锋 |
| 530 | 基于离散粒子群算法的炼钢连铸生产调度 | 机械设计与制造 | 2016,(7),49-51 | 国内期刊 | 郑鹏, 唐秋华, 张启敏, 王春锋 |
| 531 | 机器人路径规划的栅格模型构建与蚁群算法求解 | 机械设计与制造 | 2016,(4),178-181 | 国内期刊 | 柴寅, 唐秋华, 邓明星, 胡进 |
| 532 | 迭代局部搜索求解双边混流装配线平衡问题 | 机械设计与制造 | 2016,(3),54-57 | 国内期刊 | 李梓响, 唐秋华, 毛永年, 张利平 |
| 533 | 改进遗传算法求解大规模混流U型装配线问题 | 机械设计与制造 | 2016,(1),137-139 | 国内期刊 | 张子凯, 唐秋华, 张利平, 林斌 |
| 534 | 蒸汽量自动控制的鱼面集成加工装置设计 | 食品与机械 | 2016,32,(9),63-66 | 国内期刊 | 程宏, 江志刚,范卓, 向鹏 |
| 535 | 基于熵权和topsis法的再制造逆向物流模式决策研究 | 制造技术与机床 | 2016,(8),71-76 | 国内期刊 | 程宏, 江志刚, 向鹏, 张华 |
| 536 | 面向绿色制造的少切削液加工工艺参数优化 | 机械设计与制造 | 2016,(9),127-130 | 国内期刊 | 江亚, 江志刚, 张华, 周帆 |
| 537 | 高效节能毛坯尺寸优化研究 | 组合机床与自动化加工技术 | 2016,(3),135-137 | 国内期刊 | 肖永茂, 张华, 江志刚 |
| 538 | 一种基于工件几何特征优化的能耗模型及应用 | 制造技术与机床 | 2016,(12),21-25 | 国内期刊 | 易敏, 张华, 鄢威 |
| 539 | 钢铁生产智能调度系统模型重构的研究 | 机械设计与制造 | 2018,(1),15-18 | 国内期刊 | 李婷婷, 蒋国璋, 李骁勇, 周梦杰 |
| 540 | 基于FLUENT的射流管伺服阀前置级放大器流场的数值仿真 | 机床与液压 | 2016,44,(4),41-43 | 国内期刊 | 赵康, 傅连东,湛从昌, 靖保平, 龚云 |
| 541 | 轧机AGC伺服液压缸结构优化探讨 | 液压与气动 | 2016,(6),13-17 | 国内期刊 | 朱兵, 傅连东, 黄科夫,湛从昌, 高雨 |
| 542 | 封闭式多孔形液压缓冲缸仿真与研究 | 机床与液压 | 2016,44,(1),158-160 | 国内期刊 | 熊海军, 傅连东, 周栋栋, 彭博轩 |
| 543 | 大型混匀取料机料耙液压系统可靠性最优化研究 | 武汉科技大学学报 | 2016,39,(3),214-218 | 国内期刊 | 韩奇, 文小莉,陈奎生, 傅连东 |
| 544 | 非结构化环境中基于栅格法环境建模的移动机器人路径规划 | 机床与液压 | 2016,44,(17),1-7 | 国内期刊 | 刘晓磊,蒋林,金祖飞,郭晨 |
| 545 | 基于领导者的群体机器人编队及导航控制 | 武汉科技大学学报 | 2016,39,(3),219-223 | 国内期刊 | 陈浩, 雷斌, 高全杰 |
| 546 | 群体机器人实验平台设计及其编队控制应用 | 南昌工程学院学报 | 2016 | 国内期刊 | 赵东相, 雷斌, 陈浩 |
| 547 | 基于“十字双滑块模型”的矩形化补偿机构设计 | 机械传动 | 2016,(6),82-85 | 国内期刊 | 束智伟, 陈新元, 詹小辉, 邓江洪 |
| 548 | 垂直钻井工具二轴重力加速度计安装误差标定 | 石油学报 | 2016,37,(10),1302-1308 | 国内期刊 | 邓江洪, 陈新元, 刘白雁, 曾良才, 卢云丹 |
| 549 | 一种电液弹性力负载模拟器及其性能研究 | 机械设计与制造 | 2016,(6),143-146 | 国内期刊 | 金晓宏, 肖鹏飞, 杨科 |
| 550 | 非全周矩形开口滑阀小开口度时流量及液动力特性研究 | 流体机械 | 2016,44,(7),14-17 | 国内期刊 | 杨科, 金晓宏,肖鹏飞,唐文 |
| 551 | 一个新三阶混沌系统及其镇定 | 机械设计与制造 | 2016,(5),141-143 | 国内期刊 | 金晓宏, 杨科, 刘文浩, 肖鹏飞 |
| 552 | 步进梁式加热炉中步进梁立柱管热流固耦合分析 | 《铸造技术》 | 2016,(2),295-298 | 国内期刊 | 金晓宏, 罗定,张伊波, 杨科 |
| 553 | 铅酸蓄电池刀切分离器设计 | 液压与气动 | 2016,(8),48-51 | 国内期刊 | 刘爽,杨金堂,林孝毅 |
| 554 | 机械人多指抓取最优规划的研究现状和发展趋势 | 长江大学学报（自科版） | 2016,13,(1),60-64 | 国内期刊 | 孙瑛, 苗卫, 李公法,孔建益,蒋国璋 |
| 555 | 关节型机器人轨迹规划算法及轨迹规划研究现状 | 长江大学学报（自科版） | 2016,13,(28),32-38 | 国内期刊 | 孙瑛,程文韬,李公法,孔建益,蒋国璋 |
| 556 | 动态车间作业调度问题中调度规则算法研究综述 | 计算机应用研究 | 2016,33,(3),648-65 | 国内期刊 | 范华丽,熊禾根,蒋国璋,李公法 |
| 557 | 气体轴承实验台管道非定常流动初步研究 | 机床与液压 | 2016,44,(3),86-88 | 国内期刊 | 郭良斌,赵运翔,李旭东 |
| 558 | 暂冲气源系统设计 | 机床与液压 | 2016,44,(13),96-100 | 国内期刊 | 李旭东,郭良斌,徐凡 |
| 559 | 热镀锌沉没辊装置振动固有特性影响因素研究
| 机械科学与技术 | 2016,(2),187-191 | 国内期刊 | 黄毫军,王兴东,李友荣,刘傲,陈晓文 |
| 560 | 耐火材料热导率的数值推演方法 | 耐火材料 | 2016,50,(3),165-169 | 国内期刊 | 黄骏,王兴东,邓承继 |
| 561 | 爬圆锥杆轮式机器人的设计及动力学研究 | 机械设计与制造 | 2016,(11),237-240 | 国内期刊 | 杨柏,王兴东,曾镛,袁树伟 |
| 562 | 基于多个无标度区多重分形理论的齿轮故障诊断 | 机械设计与制造 | 2016,(1),5-7 | 国内期刊 | 褚青青,肖涵,吕勇,杨志武 |
| 563 | 超磁致伸缩微驱动器输出特性曲线的多项式拟合 | 磁性材料及器件 | 2016,47,(3),22-26 | 国内期刊 | 余震,饶刚,霍同乾,陈定方 |
| 564 | 轧机主传动系统主联轴器安全销有限元优化设计 | 武汉科技大学学报 | 2016,39,(2),112-115 | 国内期刊 | 田野,李友荣,王涛 |
| 565 | 基于四元数理论与流形学习的多通道机械故障信号分类方法 | 武汉科技大学学报（自然科学版） | 2016,39,(6),455-461 | 国内期刊 | 何博,吕勇,易灿灿,党章 |
| 566 | 基于内聚力模型的颗粒增强耐火材料界面脱粘力学性能研究 | 机械设计与制造 | 2016,(6),208-210 | 国内期刊 | 王元仕,王志刚,刘昌明 |
| 567 | 基于改进的反演方法评估轧制界面接触应力的新型传感器理论研究 | 机械设计与制造 | 2016,(7),24-28 | 国内期刊 | 肖进辉,王志刚 |
| 568 | 基于混合摩擦模型的轧机垂扭耦合特性分析 | 机械设计与制造 | 2016,(4),153-156 | 国内期刊 | 何兆奇,王志刚 |
| 569 | 冷轧机垂直系统动态特性分析 | 机械设计与制造 | 2016,(7),65-68 | 国内期刊 | 胡传奇,王志刚 |
| 570 | 不等宽板坯重力式机械夹钳吊具动力学仿真研究及开发 | 机械设计与研究 | 2016,(3),154-156 | 国内期刊 | 刘源泂,杨柏,王兴东,陈崇阳,曾镛 |
| 571 | 仿生技术在液压领域中的应用和展望 | 液压与气动 | 2016,(8),28-31 | 国内期刊 | 陈小兰,曾良才,湛从昌,吴振鹏 |
| 572 | 内曲线液压马达减小柱塞变形结构优化 | 液压与气动 | 2016,(11),87-91 | 国内期刊 | 刘泽宇,曾良才,湛从昌,刘洋,朱兵 |
| 573 | 在役螺栓轴力电磁超声测量系统的研制 | 无损检测 | 2016,38,(6),48-52 | 国内期刊 | 丁旭,武新军 |
| 574 | 支座加劲肋对正弦波纹腹板梁疲劳性能的影响 | 武汉科技大学学报 | 2016,39,(6),446-449 | 国内期刊 | 范勤, 程俊, 刘京, 魏国前 |
| 575 | 轨道压板螺栓焊缝动力学等效模拟研究 | 武汉科技大学学报 | 2016,39,(3),209-213 | 国内期刊 | 范勤, 葛文豪, 魏国前 |
| 576 | 基于等效结构应力法的正弦波纹腹板焊接梁疲劳评定研究 | 制造技术与机床 | 2016,(2),78-81 | 国内期刊 | 马超, 范勤, 魏国前 |
| 577 |
圆柱滚子轴承工作状态分析技术
| 机械设计与制造 | 2016,(3),41-44 | 国内期刊 | 党章, 罗会信, 袁锐, 吕勇 |
| 578 | 连铸机大包回转支承故障诊断系统研究 | 机械设计与制造 | 2016,(2),49-51 | 国内期刊 | 黄争艳, 孔建益, 祁华, 刘钊 |
| 579 | 四辊方管轧机机架有限元分析与结构改进研究 | 机械设计与制造 | 2016,(12),118-120 | 国内期刊 | 李栋彬,孔建益, 王兴东, 徐福军 |
| 580 | 废旧铅酸蓄电池的X射线图像识别分类研究 | 机械设计与制造 | 2017,(10),156-158+163 | 国内期刊 | 杨金堂, 林孝毅, 杨正群, 柯昌美 |
| 581 | V型焊接坡口图像处理方法的研究 | 机械设计与制造 | 2017,(06),64-66 | 国内期刊 | 袁攀, 孔建益, 仄士春, 王兴东 |
| 582 | 带多处理器混合流水车间调度问题的混合鱼群算法 | 机械设计与制造 | 2017,(07),22-25 | 国内期刊 | 蔡芸, 邓勇, 张波, 张利平 |
| 583 | 单孔浸没式顶吹搅拌水模实验及搅拌效果评价方法研究 | 机械设计与制造 | 2017,(11),26-29+33 | 国内期刊 | 鲁伟, 王兴东, 欧阳德刚, 李明晖 |
| 584 | 低度欠膨胀超音速圆盘止推气体轴承缝隙射流的数值模拟 | 武汉科技大学学报 | 2017,(04),285-289 | 国内期刊 | 郭良斌, 张一帆 |
| 585 | 多种构型正逆运动学统一求解方法研究 | 机械设计与制造 | 2017,(08),39-42 | 国内期刊 | 蒋林, 肖俊, 金晓宏, 朱志超 |
| 586 | 二级斜齿圆柱齿轮传动齿向综合修形优化研究 | 机械设计与制造 | 2017,(01),227-230 | 国内期刊 | 熊禾根, 刘美凤, 李公法 |
| 587 | 高供气压圆盘止推气体轴承收缩段设计理论研究 | 机械设计与制造 | 2017,(07),30-32+36 | 国内期刊 | 郭良斌, 徐凡 |
| 588 | 基于参数化特征的冲压模具标准斜楔建模方法 | 机械设计与制造 | 2017,(10),195-198 | 国内期刊 | 李贵, 龙小裕, 杨朋, 王文圣 |
| 589 | 基于非对称组合正弦函数的举升系统轨迹规划研究 | 机械设计与制造 | 2017,(09),20-22 | 国内期刊 | 张亚欢,赵慧, 陈奇, 谢文建 |
| 590 | 基于混合算法的多车型混载最低油耗车辆调度 | 中国科技论文在线 | 2017 | 国内期刊 | 蔡芸, 程志文, 张利平 |
| 591 | 基于量子遗传优化的原子分解算法及其在机械故障诊断中的应用 | 机械设计与制造 | 2017,(07),82-85 | 国内期刊 | 骆杰, 吕勇, 易灿灿 |
| 592 | 基于应变路径的复杂汽车结构件多工位级进模精确刃口线优化 | 锻压技术 | 2017,(08),115-121 | 国内期刊 | 李贵, 周敏, 陈志平, 熊禾根, 谭升洪 |
| 593 | 基于张量奇异谱分解的机械故障特征提取方法研究 | 机械设计与制造 | 2017,(07),56-59 | 国内期刊 | 李晓明,吕勇, 易灿灿, 黄震西 |
| 594 | 基于子结构重用的汽车覆盖件冲压模具非标斜楔设计方法 | 锻压技术 | 2017,(09),112-117 | 国内期刊 | 李贵, 龙小裕, 梁中凯, 杨朋 |
| 595 | 举升系统平衡阀定阻尼孔设计研究 | 机床与液压 | 2017,(03),177-180 | 国内期刊 | 邹竞刚, 赵慧, 谢文建, 陈奇 |
| 596 | 两级液压缸换级缓冲仿真与研究 | 机械设计与制造 | 2017,(10),71-73+77 | 国内期刊 | 周鸿杰, 赵慧, 谢文建, 陈奇 |
| 597 | 螺旋折流板式制丹炉传热的数值模拟 | 机械设计与制造 | 2017,(07),29-31+36 | 国内期刊 | 杨金堂, 田晓波, 杨正群 |
| 598 | 面向冷轧带钢表面缺陷的加权模糊层次关联规则挖掘方法 | 现代制造工程 | 2017,(09),118-122 | 国内期刊 | 李怡, 孔建益, 王兴东, 刘军伟 |
| 599 | 汽车冲压模具镶块螺钉与销钉快速设计算法研究与开发 | 锻压技术 | 2017,(10),138-144 | 国内期刊 | 李贵, 杨朋, 梁中凯, 龙小裕 |
| 600 | 全反射X射线技术应用于镀锌板锌层测量的模拟研究 | 光散射学报 | 2017,(03),285-290 | 国内期刊 | 刘宗赣, 孔建益, 徐巍, 开岗生, 王兴东 |
| 601 | 柔性石墨纸轧制装置动态特性仿真分析 | 现代制造工程 | 2017,(05),146-150 | 国内期刊 | 沈汉峰, 王宏旭,杨金堂, 李存学 |
| 602 | 时延对ITD法模态参数识别精度的影响 | 机械设计与制造 | 2017,(06),46-49 | 国内期刊 | 李宁, 许松 |
| 603 | 压缩式封隔器胶筒接触力学行为有限元分析 | 武汉科技大学学报 | 2017,(01),61-64 | 国内期刊 | 王云学, 许仁波, 孟奇龙, 江能 |
| 604 | 叶片式摆动液压缸门形密封结构的设计及性能分析 | 润滑与密封 | 2017,(05),102-108+116 | 国内期刊 | 朱志超, 蒋林, 郭晨, 程文凯 |
| 605 | 液压缸变间隙密封技术密封机理及泄漏量研究 | 机械设计与制造 | 2017,(04),6-9 | 国内期刊 | 梅波, 傅连东, 陈亮, 湛从昌 |
| 606 | 液压缸活塞表面菱形织构的动压润滑性能 | 机械设计与制造 | 2017,(04),40-42 | 国内期刊 | 刘洋, 傅连东, 卢艳, 湛从昌 |
| 607 | 液压驱动机械臂的设计与关节驱动分析 | 高技术通讯 | 2017,(02),177-183 | 国内期刊 | 高进芃, 熊禾根,陶永, 刘辉, 谢光 |
| 608 | 重轨弧面缺陷图像光照不均校正方法研究 | 机械设计与制造 | 2017,(S1),190-193 | 国内期刊 | 郑国,孔建益, 刘源泂,何可 |
| 609 | 主动磁悬浮轴承磁饱和研究 | 轴承 | 2017,(02),12-18 | 国内期刊 | 王东雄, 王念先, 陈奎生, 喻育军, 陈克应 |
| 610 | 自激振荡脉冲喷嘴空化效应及其射流形态的数值分析 | 中国机械工程 | 2017,(13),1535-1541 | 国内期刊 | 汪朝晖, 胡亚男, 饶长健, 邓晓刚 |
| 611 | 二自由度关节型机器人的自适应模糊滑模控制 | 武汉科技大学学报 | 2017,(06),446-450 | 国内期刊 | 杜峰, 孙瑛, 李公法, 李喆, 孔建益, 蒋国璋, 江都 |
| 612 | 基于迭代控制核回归的带钢表面图像去噪研究
| 机械设计与制造 | 2017,(05),119-122 | 国内期刊 | 彭宇, 汤勃, 孔建益, 王兴东 |
| 613 | 计及尺寸公差和配合的平面连杆机构优化设计 | 华中科技大学学报(自然科学版) | 2017,(03),23-28 | 国内期刊 | 王兴东, 杨柏, 孔建益, 张华 |
| 614 | 面向吨钢综合能耗预测的基因表达式编程方法 | 机械设计与制造 | 2017,(02),176-179 | 国内期刊 | 张利平, 唐秋华, C.A.Floudas, 邓明星 |
| 615 | 汽车冲压模具成本统计方法研究与系统开发 | 锻压技术 | 2017,(12),157-162 | 国内期刊 | 李贵, 梁中凯, 杨朋, 龙小裕, 毛振华 |
| 616 | 复杂汽车零件多工位级进模全工序数值模拟研究 | 锻压技术 | 2017,(12),31-36 | 国内期刊 | 周敏, 熊禾根, 李贵, 王文圣, 陈志平 |
| 617 | 机器视觉的表面缺陷检测综述 | 中国图象图形学报 | 2017,(12),1640-1663 | 国内期刊 | 汤勃, 孔建益, 伍世虔 |
| 618 | 注塑机双曲肘合模机构的多目标优化研究 | 机械设计与制造 | 2017,(12),165-168 | 国内期刊 | 齐佩, 汤勃, 孔建益, 王兴东 |
| 619 | 基于非局部均值的带钢表面图像去噪 | 机械设计与制造 | 2016,(12),242-244+248 | 国内期刊 | 童思维, 汤勃, 孔建益, 王兴东 |
| 620 | 复杂汽车零件多工位级进模全工序数值模拟 | 锻压技术 | 2017,(12),31-36 | 国内期刊 | 周敏, 熊禾根, 李贵, 王文圣, 陈志平 |
| 621 | 常规工况下塔机整体钢结构应力分析及其振动特性研究 | 电焊机 | 2017,(05),22-26+31 | 国内期刊 | 余震, 董浩明, 徐桂芳,饶刚 |
| 622 | 基于响应面分析的双主轴龙门铣床横梁截面优化设计 | 组合机床与自动化加工技术 | 2017,(03),45-48+52 | 国内期刊 | 杨建交, 赵慧, 张俊, 王奎章 |
| 623 | 基于管道改进的蝶阀阀板驱动力矩特性优化 | 武汉科技大学学报 | 2017,(02),121-126 | 国内期刊 | 金晓宏, 唐文, 曹金秋 |
| 624 | 高压圆盘气体轴承可压缩边界层形态分析 | 武汉科技大学学报 | 2017,(06),439-445 | 国内期刊 | 刘剑, 郭良斌 |
| 625 | 面向钢铁工业逆向供应链的废钢铁分类方法研究 | 现代制造工程 | 2017,(10),138-145 | 国内期刊 | 汪凯, 夏绪辉, 黄蓉, 王蕾 |
| 626 | 基于VIKOR的再制造服务供应商选择决策方法 | 武汉科技大学学报 | 2017,(04),295-301 | 国内期刊 | 夏绪辉, 胡俊峰,王蕾 |
| 627 | 面向多生命周期的再制造服务活动决策方法研究 | 机械设计与制造 | 2017,(02),108-111 | 国内期刊 | 熊颖清, 夏绪辉, 王蕾, 向红 |
| 628 | 沉没辊装置液固耦合数值模拟及振动实验 | 工程科学学报 | 2016,(12),1778-1783 | 国内期刊 | 王兴东, 黄毫军,李友荣, 乔军 |
| 629 | 面向再制造服务的回转类表面缺陷识别 | 现代电子技术 | 2017,(23),47-50 | 国内期刊 | 刘翔, 夏绪辉, 王蕾 |
| 630 | 假手控制信号源研究进展 | 长江大学学报（自科版） | 2017,(01),52-58+86 | 国内期刊 | 江都, 杜峰, 李公法, 孔建益, 孙瑛, 蒋国璋, 李嘉汉, 程文韬 |
| 631 | 基于属性差异的产品缺陷数据关联规则模糊分类 | 武汉科技大学学报 | 2017,(01),49-54 | 国内期刊 | 李怡, 孔建益, 王兴东, 刘军伟 |
| 632 | 热镀锌线沉没辊装置振动分析与结构优化 | 华中科技大学学报(自然科学版) | 2017,(12),118-122 | 国内期刊 | 王兴东, 刘灿灿, 李友荣, 彭炜 |
| 633 | 马铃薯收获机升运带块茎运动碰撞分析 | 农机化研究 | 2018,(02),29-33+39 | 国内期刊 | 王兴东, 文怀贤, 曾镛, 谢松良 |
| 634 | Service Resources Matching of Reverse Supply Chain Services | Journal of Ecology of Health & Environment | 2015,12(12),6352-6364 | 国外期刊 | Wang Lei, Xia Xuhui, Xiong Yingqing, Zhou Min, Liu Junwei, Hu Junfeng |
| 635 | 一种液压控制的无动力下降装置 |
| ZL201210028267.2 | 发明专利 | 王兴东；杨壮；王强；钟升；冒颖；徐占民； |
| 636 | 一种用于连铸结晶器的自动加渣机 |
| ZL201110362343.9 | 发明专利 | 陈新元；谢剑刚；杨文军；邓江洪 |
| 637 | 大型伺服液压缸带载活塞偏摆测试系统及其测试方法 |
| ZL201010515984.9 | 发明专利 | 陈新元；湛从昌；郭媛；陈奎生；曾良才；傅连东；张济民；易建刚；周敏；黄富瑄；邓江洪；蒋俊 |
| 638 | 一种修正型双圆环面二次包络环面蜗杆副及其制造方法 |
| ZL201110237144.5 | 发明专利 | 赵亚平；孔建益；李公法；吴天超；石绍洋 |
| 639 | 一种连铸结晶器铜板表面图像采集装置 |
| ZL201110219771.6 | 发明专利 | 王兴东；张留刚；穆天啸；刘源泂；龙辽沙；刘昀；庄静毅 |
| 640 | 一种复合式磁控马达 |
| ZL201110145807.0 | 发明专利 | 涂福泉；陈奎生；傅连东；曾良才；欧阳惠；许仁波；陈新元；赵振飞；蒋俊；任印美；周雯娟；刘春雨；梅元元；胡良智 |
| 641 | 一种复合式流量阀 |
| ZL201110145809.x | 发明专利 | 涂福泉；陈奎生；傅连东；曾良才；欧阳惠；许仁波；陈新元；赵振飞；蒋俊；任印美；周雯娟；刘春雨；毛阳；余超 |
| 642 | 一种机械式断水自动关闭阀门 |
| ZL201110361002.X | 发明专利 | 李公法；苏小程；杨金堂；吴泽豪；孔建益 |
| 643 | 一种复合式高频大流量伺服阀 |
| ZL201110145806.6 | 发明专利 | 涂福泉;陈奎生;傅连东;曾良才;欧阳惠;许仁波;陈新元;赵振飞;蒋俊;任印美;周雯娟;刘春雨 |
| 644 | 一种用于连铸结晶器的自动加渣机 |
| ZL201210131894.9 | 发明专利 | 周鼎;陈奎生;林又红;但斌斌;熊凌;李志红;容芷君;邱爽;周昶君;周鑫;汪鸣琦;蒋俊;刘传胜;张杰峰 |
| 645 | 一种基于磁控形状记忆合金的驱动装置 |
| ZL201210360190.9 | 发明专利 | 涂福泉;陈奎生;赵振飞;曾良才;傅连东;许仁波;陈新元;张安裕;张小波;毛阳;胡良智;刘春雨;牛晓阳;刘小双;曾庆兵;李贺 |
| 646 | 锅炉燃烧无烟雾排污水节能组合机 |
| ZL201210016360.1 | 发明专利 | 李公法;蒋国璋;赵颖云;孔建益;赵亚平;谢良喜;黄庭仪 |
| 647 | 一种钢管轴向切割机 |
| ZL201210339823.8 | 发明专利 | 涂福泉;张安裕;陈奎生;毛阳;胡良智;张小波;刘春雨;余金华;牛晓阳;刘小双;曾庆兵;李贺 |
| 648 | 一种双级伺服液压缸 |
| ZL201110149503.1 | 发明专利 | 曾良才;陈善雄;陈新元;姜领发;湛从昌;余飞;傅连东;秦尚林;许锡昌;陈昶龙;万园;郑飞龙;雷斌 |
| 649 | 一种液压系统用复合型过滤器 |
| ZL201210296142.8 | 发明专利 | 湛从昌;陈奎生;曾良才;傅连东;陈新元;李远慧;郑飞龙 |
| 650 | 一种恒温恒PH值的石煤提钒搅拌浸出槽 |
| ZL201310355179.8 | 发明专利 | 孔建益;吴宗武;侯宇;刘源泂;姜繁智;王兴东 |
| 651 | 一种用于冷轧冷却液处理的导轨式永磁磁链过滤系统 |
| ZL201410004141.0 | 发明专利 | 赵刚;张华;张业祥;张璋 |
| 652 | 用于高铁轨道路基测试的伺服控制液压激振系统 |
| ZL201110149496.5 | 发明专利 |
陈善雄;曾良才;陈新元;姜领发;湛从昌;余飞;傅连东;秦尚林;许锡昌;陈昶龙;万园;郑飞龙;雷斌
|
| 653 | 基于气动控制的瓷砖排布装置 |
| ZL201210259112.X | 发明专利 | 邹光明;孔建益;熊禾根;李萍;邹时兴;王兴东;杨威;姜繁智;侯宇;汤勃 |
| 654 | 大型液压缸高频带载频率特性测试装置及其测试方法 |
| ZL201310075337.4 | 发明专利 | 陈奎生；邓江洪；曾良才；陈新元；湛从昌 |
| 655 | 一种负载变换液压系统用流量自动调节阀 |
| ZL201310091645.6 | 发明专利 | 湛从昌；邓江洪；曾良才；陈新元；陈奎生；傅连东；黄富瑄 |
| 656 | 一种低摩擦动静压支承导向液压缸 |
| ZL201410144495.5 | 发明专利 | 湛从昌；陈新元；牛晓阳；陈奎生；傅连东；黄富瑄 |
| 657 | 一种速度变换双活塞串联液压缸 |
| ZL201410137680.1 | 发明专利 | 湛从昌；陈奎生；龚云；蒋俊；陈新元；吴凛 |
| 658 | 一种用于石煤提矾的缩口型回转窑 |
| ZL201310547822.7 | 发明专利 | 王兴东；幸福堂；黄毫军；王晶；侯宇 |
| 659 | 一种检修双梁起重机用移动车 |
| ZL201310372093.6 | 发明专利 | 王兴东；陈崇阳；刘秀峰；刘源泂；肖述文；杨科；何涛 |
| 660 | 一种用于矿道内搬运重物的工业机器人 |
| ZL201310453633.3 | 发明专利 | 周鼎；陈奎生；林又红；但斌斌；李志红；郭玉昌；汪鸣琦；刘传胜；周鑫；程浩洋；邱爽；周昶君 |
| 661 | 大行程微驱动精密二维工作台 |
| ZL201310166438.2 | 发明专利 | 余震；吴再豪；方毅；唐秋华；李千；魏国前；李公法 |
| 662 | 一种可植入式两级轴流血泵转子结构 |
| ZL201310112164.9 | 发明专利 | 赵慧；李涛；陈奎生；蒋林；许仁波 |
| 663 | 一种模压纤维板裁切定位的方法及装置 |
| ZL201410017758.6 | 发明专利 | 夏绪辉；周治国；谢良喜 |
| 664 | 一种液压挖掘机工作装置的荷载谱测试方法 |
| ZL201310098680.0 | 发明专利 | 赵刚；胡晓莉；张华；向琴；郭黎明；鄢威；张旭刚 |
| 665 | 一种转阀式大扭矩液压转角自伺服阀 |
| ZL201210514025.4 | 发明专利 | 蒋林；胡琪；梅鹏；曾良才；张宏伟；吴若麒；晏晚君；金晓宏
|
| 666 | 一种双叶片液压自伺服摆动缸 |
| ZL201310064890.8 | 发明专利 | 蒋林；张宏伟；胡琪；刘白雁；梅鹏；吴若麒；晏晚君；郑翠；胡金；郑开柳；向贤宝；曾镛；金晓宏；赵慧；曾良才 |
| 667 | 一种蛇形水压灭火的机器人关节 |
| ZL201310685818.7 | 发明专利 | 蒋林；吴若麒；梅鹏；晏晚君；张宏伟；曾良才；胡琪；胡金；郑翠；郑开柳；邹竞刚；金祖飞；赵慧；雷斌；曾镛；许仁波 |
| 668 | 一种易控液压转角自伺服阀 |
| ZL201210033081.6 | 发明专利 | 蒋林；陈新元；向贤宝；赵杰；曾良才；赵慧；金晓宏；侯宇；曾镛；雷斌；刘白雁；许仁波 |
| 669 | 一种单叶片水压自伺服转阀 |
| ZL201310301913.2 | 发明专利 | 蒋林；晏晚君；梅鹏；张宏伟；胡琪；吴若麒；郑开柳；郑翠；胡金；郑洁；傅连东；赵慧；刘白雁；雷斌；曾镛；许仁波 |
| 670 | 输砂机试验装置及方法 |
| ZL201410726867.5 | 发明专利 | 贾宏禹；孔建益；周思柱 |
| 671 | 一种半夏收获机及收获方法 |
| ZL201410116004.6 | 发明专利 | 江志刚；张华；鄢威；酱鸭；张璋；李公法 |
| 672 | 一种具有智能控制功能的半夏清洗脱皮机 |
| ZL201410589268.3 | 发明专利 | 江志刚；江亚；张璋；张华；鄢威；张旭刚 |
| 673 | 一种用于石煤提钒的扩口型回转窑 |
| ZL201310547038.6 | 发明专利 | 孔建益；幸福堂；黄毫军；王晶；王兴东 |
| 674 | 一种二力杆系的水平轮防啃轨装置 |
| ZL201310140079.3 | 发明专利 | 罗会信；杨国华；魏国前；饶刚；范勤；康福 |
| 675 | 一种基于磁控记忆合金的双向驱动高速开关阀 |
| ZL201310635312.5 | 发明专利 | 涂福泉；刘小双；李贺；陈奎生；曾良才；欧阳惠；傅连东；许仁波；周浩；王琦琳 |
| 676 | 一种基于磁控记忆合金的差动式高速开关阀 |
| ZL201310635743.1 | 发明专利 | 涂福泉；刘小双；李贺；陈奎生；曾良才；傅连东；许仁波 |
| 677 | 一种全自动的晾收衣装置 |
| ZL201310197622.3 | 发明专利 | 邹光明；丁博；孙俊杰；张宝祥；黄旭；邓如应；王兴东；刘波；李萍；董倩倩；周泉钢；罗明；王宁超 |
| 678 | 一种用于静电涂油机的气溶性刀梁装置 |
| ZL201210565039.9 | 发明专利 | 汪朝晖；高全杰；张豪；徐占民；王楚培 |
| 679 | 一种基于导热油的恒温轧辊 |
| ZL201410048276.7 | 发明专利 | 王兴东；黄骏；肖述文；刘源泂；周三春；徐福军 |
| 680 | 用于实验焦炉料样的捣固设备 |
| ZL201410103967.2 | 发明专利 | 李公法；刘佳；肖文涛；赵亚平；赵颢云；蒋国璋；刘洪海；孔建益；熊禾根；刘怀广；谢良喜；章易坤；程福维；李明；谌天伟 |
| 681 | 用于烟道篦子砖孔径的精确调节仪器 |
| ZL201410054971.4 | 发明专利 | 李公法；章易坤；程福维；赵亚平；赵颢云；蒋国璋；刘洪海；孔建益；谢良喜；刘佳；肖文涛； |
| 682 | 防止焦炉煤气主管形成负压的装置 |
| ZL201410200332.4 | 发明专利 | 李公法；章易坤；程福维；赵亚平；赵颢云；蒋国璋；刘洪海；孔建益；熊禾根；刘怀广；谢良喜；刘佳；肖文涛；李喆；丁威良；陈迪斯；刘泽；苗卫；施威；李明；谌天伟 |
| 683 | 焦炉碳化室压力调节系统电磁线圈调压用水封装置 |
| ZL201410227768.2 | 发明专利 | 李公法；程福维；章易坤；赵亚平；赵颢云；蒋国璋；刘洪海；孔建益；熊禾根；刘怀广；谢良喜；刘佳；肖文涛；李喆；丁威良；陈迪斯；刘泽；苗卫；施威；李明；谌天伟 |
| 684 | 一种可精确调节的焦炉煤气流量调节装置 |
| ZL201410030089.6 | 发明专利 | 李公法；雷崇武；刘佳；赵亚平；赵颢云；蒋国璋；刘洪海；孔建益；熊禾根；谢良喜；肖文涛；章易坤；程福维 |
| 685 | 一种循环式焦炉装煤导烟水封系统设备 |
| ZL201410104185.0 | 发明专利 | 李公法；肖文涛；章易坤；赵亚平；赵颢云；蒋国璋；刘洪海；孔建益；熊禾根；刘怀广；谢良喜；刘佳；程福维；李明；谌天伟 |
| 686 | 一种多功能机器视觉成像平台 |
| ZL201310491547.1 | 发明专利 | 刘源泂；孔建益；徐福军；刘钊；王兴东；汤勃；姜繁智；刘怀广；邹光明；侯宇 |
| 687 | 一种合金化炉均热段温度控制系统 |
| ZL201410241358.3 | 发明专利 | 邹光明；熊建敏；王兴东；幸福堂；杨科；李萍；刘源泂；姜繁智；周伟鹏 |
| 688 | 一种相控阵雷达使用中防止串气积灰的防护装置 |
| ZL201410681102.4 | 发明专利 | 李佳；杜辉；蒋俊；但斌斌 |
| 689 | 一种摆杆式自伺服液压缸 |
| ZL201310443713.0 | 发明专利 | 蒋林；吴若麟；张宏伟；胡国；郑洁；曾良才；晏晚君；胡金；郑翠；郑开柳；肖俊；刘晓磊；陈新元；傅连东；赵慧；刘白雁；雷斌；曾镛；许仁波 |
| 690 | 一种可连续旋转的自伺服液压机器人关节 |
| ZL201410404011.6 | 发明专利 | 蒋林；郑开柳；刘晓磊；金晓宇；胡金；黄桂德；赵慧；朱建阳；雷斌；许仁波；陶波 |
| 691 | 一种直通双螺旋收敛型水压雾化喷嘴 |
| ZL201410278373.5 | 发明专利 | 蒋林；邹竞刚；吴若麟；梅鹏；晏晚君；赵慧；郑开柳；郑翠；胡金；郑洁；刘晓磊；金祖飞；周鸿杰；朱建阳；雷斌；许仁波 |
| 692 | 一种转角自伺服阀控环形缸 |
| ZL201410385707.9 | 发明专利 | 蒋林；胡金；吴若麟；黄桂德；邹竞刚；梅鹏；晏晚君；赵慧；郑开柳；郑翠；郑洁；刘晓磊；金祖飞；周鸿杰；朱建阳；刘白雁；雷斌；曾镛 |
| 693 | 一种采用导热油加热的辊套式轧辊 |
| ZL201410048249.X | 发明专利 | 王兴东；黄骏；肖述文；刘源泂；周三春；徐福军 |
| 694 | 一种轧制锂电池极片的轧辊 |
| ZL201410048270.X | 发明专利 | 王兴东；鲁伟；黄骏；刘源泂；周三春；徐福军 |
| 695 | 一种用于室内和车内的空气高压静电净化器 |
| ZL201410319500.1 | 发明专利 | 周鼎；陈奎生；林又红；但斌斌；李志红；熊凌；汪鸣琦；周鑫；邱爽；樊自力；周昶君；戴威；杨迅兴；程浩洋 |
| 696 | 一种基于压电智能材料的螺栓预紧力传感器 |
| ZL201310724990.9 | 发明专利 | 王涛；李友荣；王志刚；吕勇；肖涵 |
| 697 |
一种自适应负载变换液压缸
|
| ZL201410137602.1 | 发明专利 | 湛从昌；张安裕；陈奎生；邓江洪；陈新元；曾良才 |
| 698 | 一种采用双对称收缩段供气的高压圆盘止推气体轴承及设计方法 |
| ZL201610049454.7 | 发明专利 | 郭良斌；徐凡；王俊文；张一凡；周传辉；陈珊秀；刘剑；张雄威 |
| 699 | 一种面向能效提升的机械加工工艺链优化方法 |
| ZL201410096968.9 | 发明专利 | 江志刚；朱硕；张华；李弼心；鄢威；王艳红；蒋国璋；张跃 |
| 700 | 一种高效循环湿法研磨器 |
| ZL201410051269.2 | 发明专利 | 孙瑛；肖文涛；雷崇武；熊禾根；蒋国璋；李公法；谢良喜；陶平 |
| 701 | 一种自启动少切削液冷却润滑系统及其控制方法 |
| ZL201410119725.2 | 发明专利 | 肖明；张华；江志刚；曾良才；周艳；周敏；鄢威；王贤琳；向琴； |
| 702 | 新型磁控形状记忆合金多场耦合力学性能测试平台 |
| ZL201310533921.X | 发明专利 | 许仁波；王云学；孟奇龙；杨攀；涂福泉；陈新元；傅连东 |
| 703 | 一种基于时间参数的数控铣床能耗预测方法 |
| ZL201410137896.8 | 发明专利 | 张华；马峰；胡狄；张绪美；曾文韬；江志刚；李弼心；向琴 |
| 704 | 一种基于电液伺服的汽车主动减震器 |
| 201510740465.5 | 发明专利 | 郑飞龙；曾良才；张杰峰；蒋俊；卢云丹；毛阳；陈克应 |
| 705 | 一种连续可调式水气雾化转炉炉壳上段冷却装置 |
| 201510647794.5 | 发明专利 | 汪朝晖；艾孝杰；谭万州；曾顺华；左练洲；苏磊；张凯；詹晋怡；黎纯；赵丽敏；黄秋红；杨超；张子龙；汪刚 |
| 706 | 建筑用机械手式喷抹机 |
| 201510730777.8 | 发明专利 | 蒋国璋；雷斌；王念先；谢良喜；孔令盼；杨鹏飞；何丽驰 |
| 707 | 一种内部注入润滑脂的可调密封圈 |
| 201610863124.1 | 发明专利 | 郭媛；吴凛；蒋俊；陈新元；邢晓文；洪从昌 |
| 708 | 混凝土泵车布料软管状态的检测系统 |
| 201310750234.3 | 发明专利 | 曾镛；徐刚；刘白雁；张如伟；杨海清；李勇；陈新元；黄大伟；李业林；余金华 |
| 709 | 盘形凸轮轮廓设计教学示教及运行特性测量仪 |
| 201510162664.2 | 发明专利 | 余震；杨丹；何明金；饶刚；解庆博 |
| 710 | 一种导向系统变间隙密封式液压缸 |
| 201510387774.9 | 发明专利 | 湛从昌；文小莉；陈奎生；周娇；陈新元 |
| 711 | 一种机械加工过程中少切削液加工工艺优化控制方法 |
| 201410063984.8 | 发明专利 | 江志刚；周帆；张华；肖明；鄢威；周敏；冯朝辉；马峰；李弼心 |
| 712 | 一种自动投放装置 |
| 201510533177.2 | 发明专利 | 涂福泉；胡丹谋；庄羽航；陈奎生；吕杰；曾良才；欧阳惠；许仁波；王云学；王琦琳；周浩 |
| 713 | 一种重轨在线控冷装置 |
| 201510886823.3 | 发明专利 | 涂福泉；胡升谋；钟东阶；赵刚；欧阳惠；庄羽航；吕杰；王云学
|
| 714 | 一种用于激光拼焊的钢板预定位装置 |
| 201510715785.5 | 发明专利 | 涂福泉；庄羽航；胡升谋；陈奎生；吕杰；王云学；王琦琳；周浩 |
| 715 | 一种能自动监测内泄漏的液压缸 |
| 201510394782.6 | 发明专利 | 邓江洪；陈新元；吴凛；郭媛；黄富璀；湛从昌 |
| 716 | 一种KR脱硫用桨式搅拌器的叶片磨损评估方法 |
| 201410211746.7 | 发明专利 | 但斌斌；容芷君；陈企生；湛从昌；肖林伟；曾良才；傅连东；陈新元；朱学彪 |
| 717 | 一种KR脱硫铁水液面高度测量系统及其使用方法 |
| 201410208174.7 | 发明专利 | 陈奎生；肖林伟；但斌斌；湛从昌；容芷君；曾良才；傅连东；陈新元；朱学彪 |
| 718 | 一种具备蒸汽量自动控制功能的集成式鱼面加工设备 |
| 201510819236.2 | 发明专利 | 王创剑；程宏；范卓；江志刚；向鹏 |
| 719 | 一种防失电抛锚的汽车组合电池 |
| 201510558630.5 | 发明专利 | 蒋林；程文凯；郭晨；朱志超；刘晓磊；金祖飞；肖俊 |
| 720 | 一种宽板坯结晶器用双管自动加渣机 |
| 201510174589.1 | 发明专利 | 陈新元；束智伟；詹小辉；傳连东；湛从昌；卢云丹；邓江洪；余峰；郭凯 |
| 721 | 一种测量轧制界面处接触应力的光纤光栅传感器 |
| 201510193289.8 | 发明专利 | 王志刚；肖进辉；郭永兴；王涛 |
| 722 | 自动入库式恒温细胞转运系统 |
| 201410717842.9 | 发明专利 | 李公法；苗卫；陈迪斯；赵颖云；赵亚平；蒋国璋；刘洪海；孔建益；熊禾根；谢良喜；高旭峰；张启炯；李明；谌天伟 |
| 723 | 一种机械式自动发酵罐搅拌设备 |
| 201410717841.4 | 发明专利 |
李公法；李喆；刘泽；赵颢云；赵亚平；蒋国璋；刘洪海；孔建益；熊禾根；谢良喜；张启炯；李明；谌天伟；高旭峰
|
| 724 | 一种高压巡线机器人机械臂 |
| 201410651771.7 | 发明专利 | 蒋林；刘晓磊；金祖飞；肖俊；朱建阳；陶波；吴若麟；郑开柳；邹竞刚；朱志超；程文凯；郭晨；赵慧；刘白雁；雷斌；李公法 |
| 725 | 一种用单电机控制三臂运动的高压巡线机器人 |
| 201410832770.2 | 发明专利 | 蒋林；刘晓磊；金祖飞；肖俊；朱建阳；陶波；吴若麟；郑开柳；邹竞刚；朱志超；程文凯；郭晨；赵慧；刘白雁；雷斌；李公法 |
| 726 | 光纤光栅六维力传感器及其主体结构和测量方法 |
| 201510697769.8 | 发明专利 | 郭永兴；孔建益；王兴东；熊禾根 |
